My furnace isn't working; Coleman, DGAA056BDTA
The furnace indicator flashes twice, which means it's saying the combustion air switch is stuck shut.
It doesn't ignite, there is no flame visible in the viewing window.
I've replaced the pressure switch/combustion air switch, which did not solve the problem and I still get 2 flashes, indicating it is stuck closed.
On the circuit board I notice one area with what appears to be overheating; it's apparently a slight burning of the board in a small area.
The induction motor is mounted to the right of the pressure switch which I replaced; it's mounted on the vent flue which goes to the roof and it'll be very difficult for me to reach 2 of the 4 screws. Do I need to get in there to do anything?
Hoping for any knowledgeable, helpful suggestions; I'm trying to do it myself so as to save money.
Coleman Furnace coleman furnace dgaa056BDTA
-
- Posts: 2
- Joined: Tue Nov 13, 2012 10:08 pm
I can feel the vibration there, so I think it's running. I can't see it as I can't get to 2 of the screws.DaleM wrote:That induction motor is actually called a combustion motor and that tube it is mounted on in the fresh air intake assembly. Does that motor start up?
Thank you for correcting me on the "fresh air intake assembly" term.
-
- Similar Topics
- Replies
- Views
- Last post
-
-
Eb12eb Coleman furnace 4 speed help.
by Johnwayne892000 » Thu Aug 30, 2018 7:37 pm » in Coleman Service & Repair - 0 Replies
- 24986 Views
-
Last post by Johnwayne892000
Thu Aug 30, 2018 7:37 pm
-
-
-
Coleman 6806a furnace doesn't stop heating even with tstat disconnected. Any ideas?
by Neighbor Bill » Mon Dec 31, 2018 1:01 pm » in Coleman Service & Repair - 1 Replies
- 41708 Views
-
Last post by Neighbor Bill
Mon Dec 31, 2018 1:06 pm
-
-
-
DGAT Series furnace air-conditioning issue
by minnie1967 » Thu Jul 13, 2017 9:48 am » in Coleman Service & Repair - 0 Replies
- 61916 Views
-
Last post by minnie1967
Thu Jul 13, 2017 9:48 am
-
-
-
Acceptable HEAT RISE number for this 20-yr. old furnace.
by justplumducky » Tue Aug 29, 2017 5:33 pm » in Nordyne Service & Repair - 0 Replies
- 44398 Views
-
Last post by justplumducky
Tue Aug 29, 2017 5:33 pm
-
-
-
Can't get the furnace cover to go on
by nestsman » Sat Sep 30, 2017 4:53 pm » in Nordyne Service & Repair - 2 Replies
- 48445 Views
-
Last post by tkrueger
Sat May 05, 2018 9:12 pm
-