This is a delicate question, and I hope not too offensive.
Can we change our toilets to a larger size? Not the toilet itself, but the plumbing, appears to be smaller then average and it is causing some...problems. Lets just say we keep a plunger handy.
I haven't crawled underneath or asked a plumber this question yet, but hoped someone here could answer my query....has anyone replaced the plumbing for a toilet to a larger size in a mobile home?
Not your typical table talk...
Moderators: Greg, Mark, mhrAJ333, JD
Yes you can.
The standard size toilet drain pipe is 3". If yours is already 3" then your problem may be inadequate venting or poorly configured plumbing.
The standard size toilet drain pipe is 3". If yours is already 3" then your problem may be inadequate venting or poorly configured plumbing.
An individual must enforce his own meaning in life and rise above the perceived conformity of the masses. (Anton LaVey)
Standard size toilets will fit fine, Just check the drain location distance from the wall to get an idea of where it will sit.
Check the plumbing If you are having a flush problem.
Greg
Check the plumbing If you are having a flush problem.
Greg
"If I can't fix it, I can screw it up so bad no one else can either."
We replaced our commode to a new American Standard that advertised it can flush 6-8 golf balls at once. It also has a water saving technique. It is powerful. But we already had the 3" pipe... So, if this is your problem and you have a 3" pipe try shopping at Lowe or somewhere similar that carries American Standard or any commode that will flush golf balls...
Funny you should mention this. When we bought our trailer it had been vacant for some time. Needless to say the toilets were very dirty and frankly built for someone much smaller. My wife insisted that new ones be installed the first weekend there. I installed two of these,,,, they came with everything (seat & wax ring) and not all do.
http://www.homedepot.com/h_d1/N-5yc1v/R ... reId=10051
http://www.homedepot.com/h_d1/N-5yc1v/R ... reId=10051
-
- Posts: 622
- Joined: Tue Nov 11, 2008 6:12 pm
- Location: wisconsin
Lots of things to check. Find out what size your toilet drains are now. Are they slopped right? Is it vented right and the vent not blocked? If those are fine it may be the toilet. I replaced both of ours a few years ago. One flushed great, has never clogged once. The other one which is a different brand/model has plugged a bunch of times. The old toilet didn't plug, the only reason we changed it was the wifey wanted a new one. I took the toilet off a few times to check things out but never found any problems, the toilet just doesn't flush good. So it may be your toilet if the plumbing is right.
-
- Similar Topics
- Replies
- Views
- Last post
-
-
Suggested online market to sell your unused skateboards
by luckejuin » Fri May 08, 2020 3:56 am » in Mobile Home Repair - 1 Replies
- 4860 Views
-
Last post by Mark440
Fri May 08, 2020 8:59 am
-
-
-
Intertherm standing pilot LPG burner 77 BTU IN gas valve mounting plate gets hot ( not warm).
by justplumducky » Sat Sep 09, 2017 3:34 am » in Nordyne Service & Repair - 1 Replies
- 74895 Views
-
Last post by Maxwell.lipphardt
Thu Nov 22, 2018 10:15 am
-
-
-
Intertherm outdoor a/c unit, blower not turning off. Model unknown rating plate is faded out.
by tkrueger » Sat May 05, 2018 8:57 pm » in Nordyne Service & Repair - 0 Replies
- 116444 Views
-
Last post by tkrueger
Sat May 05, 2018 8:57 pm
-
-
-
Heat strips are on, but not the fan.
by Forestbrook » Sat Dec 08, 2018 6:09 pm » in Coleman Service & Repair - 0 Replies
- 42150 Views
-
Last post by Forestbrook
Sat Dec 08, 2018 6:09 pm
-
-
- 2 Replies
- 27493 Views
-
Last post by plumducky
Tue Dec 10, 2019 3:59 pm