another issue is my range vent damper has broke and is letting in cold air bc it will not fold back down. where can i find one of these at i've looked online and at lowes with no luck. thanks
http://i900.photobucket.com/albums/ac20 ... 2fa074.jpg
replacement range vent
Moderators: Greg, Mark, mhrAJ333, JD
Buy a standard vent from any of the home building stores and modify it to fit the opening. They have them for stove vents, dryers, furnaces etc. Just get one big enough to cover the existing opening and don't worry about the shape. Then modify the hose to conect to the existing range vent line. It dosn't need to fit perfect just make sure it is installed water tite on the outside.
An individual must enforce his own meaning in life and rise above the perceived conformity of the masses. (Anton LaVey)
Measure it up and check the home centers, It seems like I got one at Lowes a few years ago.
You can always pull the inside filter down and wrap it with foil to block the air from coming in.
Greg
You can always pull the inside filter down and wrap it with foil to block the air from coming in.
Greg
"If I can't fix it, I can screw it up so bad no one else can either."
This may be a direct fit for you. Less messing around for it. The vent in the picture is one of a couple that might work for you and can be found here ----> http://search.mobilehomepartsstore.com/ ... th-flapper
It says roof vents, but just look lower on the page and there are wall vents.
It says roof vents, but just look lower on the page and there are wall vents.
You do not have the required permissions to view the files attached to this post.
☯JD♫
Today is PERFECT!
All information and advice given is for entertainment and informational purposes only. The person doing the work is solely responsible to insure that their work complies with their local building code and OSHA safety regulations.
Today is PERFECT!
All information and advice given is for entertainment and informational purposes only. The person doing the work is solely responsible to insure that their work complies with their local building code and OSHA safety regulations.
-
- Similar Topics
- Replies
- Views
- Last post
-
- 2 Replies
- 3117 Views
-
Last post by simpleword
Tue Jun 05, 2018 10:09 pm
-
- 1 Replies
- 3585 Views
-
Last post by Greg
Sun Oct 14, 2018 8:41 am
-
-
Doublewide - Vent or Leave roof Non-vented?
by 73Viking » Fri Jun 14, 2019 7:00 pm » in Mobile Home Repair - 2 Replies
- 11567 Views
-
Last post by 73Viking
Sat Jul 13, 2019 12:21 pm
-
-
- 3 Replies
- 3183 Views
-
Last post by Greg
Thu Aug 22, 2019 6:56 pm
-
- 0 Replies
- 88977 Views
-
Last post by jacklynbotsford
Wed May 20, 2020 10:00 am