Guys
How do you remove the sliding glass door?
I've removed the top holders and tried to lift up and in (like a santard slide door)but I'm getting caught on the inner lower lip.
Am I going to have to remove the stationary glass and try and lift the slide up and out?
Remove sliding glass door?
Moderators: Greg, Mark, mhrAJ333, JD
i felt i could make it roll better. so i adjusted the front roller and somehow made it roll way worse
now it feels like the front roller isn't rolling at all
i want to pull the door inspect the mechanism, clean and replace as needed
pics uploading now
now it feels like the front roller isn't rolling at all
i want to pull the door inspect the mechanism, clean and replace as needed
pics uploading now
Those screws on the outside is what holds the door in place. You may have a couple more screws around the strike area. Sometimes people will add screws to the jambs, but it is really unnecessary. The threshold should just have a groove that a lip on the door jamb is set into.
☯JD♫
Today is PERFECT!
All information and advice given is for entertainment and informational purposes only. The person doing the work is solely responsible to insure that their work complies with their local building code and OSHA safety regulations.
Today is PERFECT!
All information and advice given is for entertainment and informational purposes only. The person doing the work is solely responsible to insure that their work complies with their local building code and OSHA safety regulations.
"If I can't fix it, I can screw it up so bad no one else can either."
ok
figured it out
pretty simple
you loose the brackets holding the stationary porition first
once that is removed you lift and pull toward the outside the sliding portion
i pulled my roller. maxed it out. greased them both up
reinstalled everything
works like a dream now
figured it out
pretty simple
you loose the brackets holding the stationary porition first
once that is removed you lift and pull toward the outside the sliding portion
i pulled my roller. maxed it out. greased them both up
reinstalled everything
works like a dream now
-
- Similar Topics
- Replies
- Views
- Last post
-
- 1 Replies
- 2096 Views
-
Last post by Greg
Wed Jun 19, 2019 5:23 pm
-
-
Need to remove a stripped Allen wrench-type plug from the OUT PRESS port on top of gas valve
by justplumducky » Fri Aug 25, 2017 8:21 am » in Nordyne Service & Repair - 1 Replies
- 49079 Views
-
Last post by Maxwell.lipphardt
Mon Feb 04, 2019 6:29 am
-
-
-
Safe to remove this portion of bedroom/closet wall?
by Parsonschaos » Mon Nov 27, 2017 10:38 pm » in Mobile Home Repair - 1 Replies
- 9597 Views
-
Last post by Greg
Tue Nov 28, 2017 6:34 pm
-
-
-
Is it possible to remove a portion of an exterior wall?
by Lil Haus » Wed Feb 28, 2018 8:51 pm » in Mobile Home Repair - 5 Replies
- 15309 Views
-
Last post by Greg
Mon Mar 05, 2018 5:57 pm
-
-
-
'73 Viking Doublewide - Odd Ceiling Panels Hard to Remove
by 73Viking » Mon Dec 03, 2018 1:05 am » in Mobile Home Repair - 4 Replies
- 31198 Views
-
Last post by Greg
Mon Dec 10, 2018 5:34 pm
-