Need Roof Over Advice
Moderators: Greg, Mark, mhrAJ333, JD
-
- Posts: 81
- Joined: Sun Mar 11, 2012 3:56 pm
My parents have a 1982 14x70 mobile home. It has had it. Time for a roof over. We want to put metal over it but would like to make sure that we can get it as quiet as possible. Is there any special way to install it or any special materials to use to make it quiet?
I would think that a layer of rigid foam between the two roofs would help. Sounds like a question for one of the pros or someone that has a home with a roof over.
Greg
Greg
"If I can't fix it, I can screw it up so bad no one else can either."
-
- Posts: 25
- Joined: Thu Mar 27, 2014 8:19 am
- Location: nova scotia, canada
Greg, could he do a very thin layer of a rubberized compound, to me id think that would dampen the noise. im guessing his main concern is wind and rain noise on the metal roof
"The only thing impossible is being impossible itself" - my life motto
Aluminum roofs with foam board laminated to the aluminum will be a quiet roof. They are expensive though. Before my supplier closed it's doors, I sold an aluminum panel roof with 3" (R13) polystyrene foam laminated to the panels. The panels had a raised seam connection. You wouldn't hear rain from your roof in the hardest storms. Mostly because the noise of the rain landing on the ground was louder, but we are talking a huge difference. Even reduced airport noise. I am in mobile home parks almost every day, constantly seeing roofs I installed over 25 years ago. They are as viable today as when I installed them. Most of the really old ones should be calling for new caulking, but even my Vulkem 116 polyurethane sealants are still holding up.
I have also worked on quite a few rubber roofs over the years. Many of those were of the same vintage, 20-25 years old. Rubber roofs that old was from the charter products that aren't as good as the products they make today. Still I do believe my 3" metal roof product was hands down superior. I also had competitor roof products with only 1 1/4" laminated foam/aluminum roofs. These roofs did not hold up as well, but the fact is, most are still working for their homeowners, albeit pretty goobered up with sealants.
I am in the Fresno, CA area and our summers are brutal on all roof types. This is probably a good test area for longevity.
I have also worked on quite a few rubber roofs over the years. Many of those were of the same vintage, 20-25 years old. Rubber roofs that old was from the charter products that aren't as good as the products they make today. Still I do believe my 3" metal roof product was hands down superior. I also had competitor roof products with only 1 1/4" laminated foam/aluminum roofs. These roofs did not hold up as well, but the fact is, most are still working for their homeowners, albeit pretty goobered up with sealants.
I am in the Fresno, CA area and our summers are brutal on all roof types. This is probably a good test area for longevity.
☯JD♫
Today is PERFECT!
All information and advice given is for entertainment and informational purposes only. The person doing the work is solely responsible to insure that their work complies with their local building code and OSHA safety regulations.
Today is PERFECT!
All information and advice given is for entertainment and informational purposes only. The person doing the work is solely responsible to insure that their work complies with their local building code and OSHA safety regulations.
-
- Similar Topics
- Replies
- Views
- Last post
-
- 5 Replies
- 103793 Views
-
Last post by JenniferK
Wed Nov 22, 2017 12:52 am
-
- 2 Replies
- 65649 Views
-
Last post by JenniferK
Fri Nov 24, 2017 2:02 am
-
-
Roof replacement and roof over project - combined
by Joemontana » Mon May 04, 2020 9:02 pm » in Mobile Home Repair - 1 Replies
- 66709 Views
-
Last post by Greg
Tue May 05, 2020 5:06 pm
-
-
-
Metal roof over, SW with a peaked metal roof
by Hwystar73 » Thu Dec 17, 2020 9:25 pm » in Mobile Home Repair - 3 Replies
- 93710 Views
-
Last post by Hwystar73
Sun Jan 03, 2021 6:20 pm
-
-
-
Need advice on blower
by NorthTexasSafariGuy » Mon Jul 31, 2017 9:18 am » in Coleman Service & Repair - 0 Replies
- 70624 Views
-
Last post by NorthTexasSafariGuy
Mon Jul 31, 2017 9:18 am
-