1 inch wide convex trim
Moderators: Greg, Mark, mhrAJ333, JD
-
- Posts: 2
- Joined: Tue Jan 27, 2015 5:31 pm
I'd like to know what this trim is called and where I might be able to buy it. It's used on corners and joints between panels. It's in a 1981 Silvercrest double-wide. Thanks
-
- Posts: 2
- Joined: Tue Jan 27, 2015 5:31 pm
I found this at Jerry's Building Supply in Eugene, OR:
Gossen Corp. batten, 7/32 x 1" x 8', 180008602
SKU 0 11597 12042 2
3.99 each
It cut clean on a compound miter saw and took staples from a staple gun about 50 psi, without collapsing. It's some kind of plastic with the inside solid plastic. Looks pretty much like the original stuff. I looked online for it and it sells by the case, 25 pieces, about $63 a case.
Jeff in OR
Gossen Corp. batten, 7/32 x 1" x 8', 180008602
SKU 0 11597 12042 2
3.99 each
It cut clean on a compound miter saw and took staples from a staple gun about 50 psi, without collapsing. It's some kind of plastic with the inside solid plastic. Looks pretty much like the original stuff. I looked online for it and it sells by the case, 25 pieces, about $63 a case.
Jeff in OR
-
- Similar Topics
- Replies
- Views
- Last post
-
-
Buying used - Single wide vs Double wide
by mobtek » Tue Feb 11, 2020 3:58 pm » in Mobile Home Repair - 7 Replies
- 28267 Views
-
Last post by Greg
Fri Feb 14, 2020 8:58 am
-
-
- 3 Replies
- 8825 Views
-
Last post by Greg
Mon Oct 01, 2018 6:31 pm
-
- 1 Replies
- 9650 Views
-
Last post by Greg
Sat Apr 25, 2020 8:26 pm
-
-
Pre-hung door question (Triming a wide jamb into a 3-1/4" wall)
by mobtek » Fri Sep 04, 2020 7:28 pm » in Mobile Home Repair - 3 Replies
- 12628 Views
-
Last post by mobtek
Tue Sep 22, 2020 4:46 pm
-