I bought my home new from Clayton in 2008. We are having a new roof put on right now due to constant problems with it. The roofer has informed us that there is a 6 inch gap along the midline that he thinks is from the ground shifting.
My husband just called someone about re leveling the house and before he told them what was going on, the leveling guy guessed it was a Clayton home and could even tell him where the problem was (center line in living room).
According to the re-level guy, Clayton's installers always rush and don't install the home correctly and they probably left out some bolts. Has anyone heard of this before or experienced the same?
The leveling guy is coming out this afternoon to give us an estimate.
Clayton doublewide - roof sagging/installed wrong
Moderators: Greg, Mark, mhrAJ333, JD
-
- Posts: 10
- Joined: Wed Jan 07, 2009 12:20 pm
- Location: Needville, TX
So it turns out my house is sitting perfectly level. The gentleman who came out to give me a quote looked at it and said it was indeed installed wrong and its the weight of the front porch alcove that is pulling my roof apart at the marriage line. I am beyond pissed at Clayton homes.
The local manager from the dealer we bought it from has hung up on us twice after stating that we only had a one year warranty. I have called the corporate office and they have opened a claim for me but I won't hear from anyone for at least 3-5 days.
While I wait on someone to call me back about what they are going to do to fix my house, I am filing a complaint with the Texas Department of Housing and Community Affairs - Manufactured Home Division.
The local manager from the dealer we bought it from has hung up on us twice after stating that we only had a one year warranty. I have called the corporate office and they have opened a claim for me but I won't hear from anyone for at least 3-5 days.
While I wait on someone to call me back about what they are going to do to fix my house, I am filing a complaint with the Texas Department of Housing and Community Affairs - Manufactured Home Division.
-
- Posts: 10
- Joined: Wed Jan 07, 2009 12:20 pm
- Location: Needville, TX
Yeah, its pretty bad. If I can figure out how to post photos from my phone, I will. The ceiling has always looked like something was wrong but every time we pointed it out we were told, "oh that is just from the house settling, its normal".
Once the old shingles came off and work started on the new roof, the ceiling damage opened up quite a bit and I can see the insulation between the drywall and decking.
Once the old shingles came off and work started on the new roof, the ceiling damage opened up quite a bit and I can see the insulation between the drywall and decking.
Definitely want to see those pics.
I use a photobucket.com as my image hoster.
Were you have problems with cooling/heating efficiency?
Mold?
What's the fix?
I would imagine since the floors are level the roof has just settled into that opened position.
Probably jack up the side get the roof to meet. Bolt them together tight
Then let the sides back down a little at a time.
I use a photobucket.com as my image hoster.
Were you have problems with cooling/heating efficiency?
Mold?
What's the fix?
I would imagine since the floors are level the roof has just settled into that opened position.
Probably jack up the side get the roof to meet. Bolt them together tight
Then let the sides back down a little at a time.
-
- Similar Topics
- Replies
- Views
- Last post
-
- 2 Replies
- 28473 Views
-
Last post by Mark440
Tue Sep 20, 2022 2:15 pm
-
- 0 Replies
- 109599 Views
-
Last post by lefties
Mon Jan 31, 2022 3:01 pm
-
-
Sagging floor under toilet, need help with size of shutoff fittings
by ferret13sj » Thu Nov 17, 2022 9:37 pm » in Mobile Home Repair - 4 Replies
- 63380 Views
-
Last post by yakima4$
Thu Dec 01, 2022 11:16 pm
-
-
-
Doublewide - Vent or Leave roof Non-vented?
by 73Viking » Fri Jun 14, 2019 7:00 pm » in Mobile Home Repair - 2 Replies
- 11567 Views
-
Last post by 73Viking
Sat Jul 13, 2019 12:21 pm
-
-
- 5 Replies
- 24882 Views
-
Last post by jcyy1100
Thu Feb 08, 2018 1:29 am