Hi y'all!
I'm new here and purchased a 2000 Silver Creek double wide last November. I really love it! It's in super condition and I just want to do some upgrades.
Skirting is one of them. The home was owned by Fannie Mae and they did put new vinyl skirting on the sides that had holes in it before I bought it so it's not as if the skirting is in bad shape.
BUT I want something sturdier and something that looks more like a foundation. The whole yard is fenced and there's privacy fencing with a gate between the front and back yards. Do my dogs use the open gate? NOOOOOO! For some reason, they like to squeeze between the fence and the skirting, grrrrrrrr. Also, it's done fairly well in bad storms but there has been some movement.
I'm looking at insulation-backed vinyl, resin brick, and concrete panels. I want the least-expensive, sturdy option that will last and not require much, if any, upkeep. I'm also looking at the metal stuff that adds a kind of perimeter foundation.
I'd really appreciate your thoughts and input! I am disabled and on a fixed income so I need to make a really smart decision about this. Thanks!!!
Julie
Types of skirting
Moderators: Greg, Mark, mhrAJ333, JD
The most popular faux stone skirting is EverRock or EverStone. Both of these products are made of a resin material and is more sturdy than standard vinyl skirting, but still a version of plastic, ABS. You can find these and other products at
http://ashvillemobilehomes.com/skirting.html
For a concrete skirting panel, there is Hoffman Precast. I don't know this product personally, just seen on the web many times. You can find their product at
http://concreteskirting.com/
None of the above products will be inexpensive.
There are members of this web site that can tell you about using corrugated steel for skirting. This may be your most affordable stronger product. Steel panels are available in many rib designs and colors. The wavy galvanized metal is not the only choice.
Just some ideas to look at.
JD
http://ashvillemobilehomes.com/skirting.html
For a concrete skirting panel, there is Hoffman Precast. I don't know this product personally, just seen on the web many times. You can find their product at
http://concreteskirting.com/
None of the above products will be inexpensive.
There are members of this web site that can tell you about using corrugated steel for skirting. This may be your most affordable stronger product. Steel panels are available in many rib designs and colors. The wavy galvanized metal is not the only choice.
Just some ideas to look at.
JD
☯JD♫
Today is PERFECT!
All information and advice given is for entertainment and informational purposes only. The person doing the work is solely responsible to insure that their work complies with their local building code and OSHA safety regulations.
Today is PERFECT!
All information and advice given is for entertainment and informational purposes only. The person doing the work is solely responsible to insure that their work complies with their local building code and OSHA safety regulations.
Thank you for the links, JD! I'm going to check them out!
I got an estimate for the concrete panels from a company in Iowa. Product, delivery and installation came to about $4,100. That's a bit higher than I want to go but I would need to get other estimates, anyway. I have a super remodeling guy who built the deck for me and he could handle whatever type I choose as he has lots of mobile home experience.
Regarding the steel skirting -- does it rust in time? About how long does it last before having to put work into it? The remodeler suggested steel, too, but I'm worried about rust and the overall appearance over time.
Julie
I got an estimate for the concrete panels from a company in Iowa. Product, delivery and installation came to about $4,100. That's a bit higher than I want to go but I would need to get other estimates, anyway. I have a super remodeling guy who built the deck for me and he could handle whatever type I choose as he has lots of mobile home experience.
Regarding the steel skirting -- does it rust in time? About how long does it last before having to put work into it? The remodeler suggested steel, too, but I'm worried about rust and the overall appearance over time.
Julie
Hi Julie,
The best of the painted steel is very durable and rust resistant, especially if you paint or somehow "treat" the cut edges. But all steel panels will eventually rust, especially if the dogs "insult" the skirting in favorite areas. Steel buildings can last 15-20 years before showing rust at the ground level.
JD
The best of the painted steel is very durable and rust resistant, especially if you paint or somehow "treat" the cut edges. But all steel panels will eventually rust, especially if the dogs "insult" the skirting in favorite areas. Steel buildings can last 15-20 years before showing rust at the ground level.
JD
☯JD♫
Today is PERFECT!
All information and advice given is for entertainment and informational purposes only. The person doing the work is solely responsible to insure that their work complies with their local building code and OSHA safety regulations.
Today is PERFECT!
All information and advice given is for entertainment and informational purposes only. The person doing the work is solely responsible to insure that their work complies with their local building code and OSHA safety regulations.
Thanks, y'all! I'm convinced! I did a search and I didn't realize it came in so many great colors/textures!
Julie
Julie
Hi,
Welcome to the site.
In the "Articles" link above you will find some more info about this....scroll down the page and it is titled, A better skirting idea.
Yanita
Welcome to the site.
In the "Articles" link above you will find some more info about this....scroll down the page and it is titled, A better skirting idea.
Yanita
The difference between success and failure is who gives up first!
Thanks, Yanita! Both for the welcome and the referral to the article. I will check it out!
Julie
Julie
Hi Julie,
Another welcome to the site!
I have one statement as far as advice goes, concerning your set up (foundation) and your skirting.
I'd highly suggest that you wait until after the rain has tamed itself in your area before installing either! You need to let the ground dry out and settle before tackling these major jobs. If you hire these jobs out, make sure that those folks wait until the rain has stopped and the ground is stable.
No contractor in their right mind would take on this job right now, with the ground so saturated. It has to dry out first.
As far as the corrugated steel showing it's age, it's much easier painted than vinyl, ever rock or other products.
Maureen
Another welcome to the site!
I have one statement as far as advice goes, concerning your set up (foundation) and your skirting.
I'd highly suggest that you wait until after the rain has tamed itself in your area before installing either! You need to let the ground dry out and settle before tackling these major jobs. If you hire these jobs out, make sure that those folks wait until the rain has stopped and the ground is stable.
No contractor in their right mind would take on this job right now, with the ground so saturated. It has to dry out first.
As far as the corrugated steel showing it's age, it's much easier painted than vinyl, ever rock or other products.
Maureen
Never discourage anyone...who continually makes progress, no matter how slow.
'Plato'
'Plato'
Hi Maureen,
Thanks for the welcome! Yes, you're right, I do need to wait until it dries out. Geez, we're under flood warnings again for this week! Amazing.
I'm in the "gather info" stage right now. I'll get at least a few estimates, too, including the remodeling guy, of course.
Julie
Thanks for the welcome! Yes, you're right, I do need to wait until it dries out. Geez, we're under flood warnings again for this week! Amazing.
I'm in the "gather info" stage right now. I'll get at least a few estimates, too, including the remodeling guy, of course.
Julie
I know this is off topic but your avatar of your dog is beautiful! I had a dog once that looked similar to that. I love pit bulls...wonderful dogs!JD wrote:The most popular faux stone skirting is EverRock or EverStone. Both of these products are made of a resin material and is more sturdy than standard vinyl skirting, but still a version of plastic, ABS. You can find these and other products at
http://ashvillemobilehomes.com/skirting.html
For a concrete skirting panel, there is Hoffman Precast. I don't know this product personally, just seen on the web many times. You can find their product at
http://concreteskirting.com/
None of the above products will be inexpensive.
There are members of this web site that can tell you about using corrugated steel for skirting. This may be your most affordable stronger product. Steel panels are available in many rib designs and colors. The wavy galvanized metal is not the only choice.
Just some ideas to look at.
JD
-
- Similar Topics
- Replies
- Views
- Last post
-
- 3 Replies
- 13099 Views
-
Last post by Jim from Canada
Sat Jul 15, 2017 8:29 am
-
- 3 Replies
- 17832 Views
-
Last post by Greg
Fri Oct 20, 2017 7:59 pm
-
-
Should skirting hang over edge of slab?
by mdnagel » Fri Nov 03, 2017 5:07 am » in Mobile Home Repair - 10 Replies
- 47971 Views
-
Last post by Greg
Wed Nov 08, 2017 8:24 pm
-
-
- 5 Replies
- 16082 Views
-
Last post by Greg
Thu Oct 18, 2018 7:38 pm
-
-
Reil Rock Skirting - question about install
by amymarie7923 » Mon Nov 05, 2018 9:10 am » in Mobile Home Repair - 4 Replies
- 54417 Views
-
Last post by Mark440
Sun Nov 18, 2018 11:41 am
-