coleman heat pump fan wiring
I lifted the top off my coleman heat pump bphh0301ba8n, for cleaning. The 3 wires came off the condensor fan. I cannot figure how they plug back in. There is a wiring diagram to tell me where they go to, but not which teminal is which. there is red, blach and tan. thanks forany help.
Hi,
Are you saying the 3 wires came disconnected from where they go to from the motor OR they seperated from motor ?
Can you post a pic of it or a pic of wiring diagram.
I don't have that wiring diagram at present and without it or without being there, I am leary of giving wiring details as it could harm the motor.
Without any pics, I would suggest you call a Tech who can take care of it at a minimal charge.
Take care and best wishes,
Robert
Are you saying the 3 wires came disconnected from where they go to from the motor OR they seperated from motor ?
Can you post a pic of it or a pic of wiring diagram.
I don't have that wiring diagram at present and without it or without being there, I am leary of giving wiring details as it could harm the motor.
Without any pics, I would suggest you call a Tech who can take care of it at a minimal charge.
Take care and best wishes,
Robert
Some people are Humbly Grateful, while some are Grumbly Hateful.................... Which one are you ?
I would have replyed sooner, byt no one is living in the trailer, moving out. hera are a couple of pics
I am not sure, maybe there was a 3 wire plug and someone replaced it with 3 ends?. It would ake more sense to have one plug.
Best thing you can do is follow the wiring diagram on the white label on the motor then trace the wires back to where they came from and hook them up according to the motor wiring diagram.
Sounds difficult but it can be done. Just make sure you check your connections twice so as to prevent any problems.
Sounds difficult but it can be done. Just make sure you check your connections twice so as to prevent any problems.
God, grant me the serenity
to accept the things I cannot change;
the courage to change the things I can;
and the wisdom to know the difference.
to accept the things I cannot change;
the courage to change the things I can;
and the wisdom to know the difference.
Hi,
Nope, the ends are correct. You'll need to look at your wiring diagram to determine where they go.
Email me a copy of the wiring diagram to robert@mobilehomerepair.com and I'll see what I can tell you.
Take care and best wishes,
Robert
Nope, the ends are correct. You'll need to look at your wiring diagram to determine where they go.
Email me a copy of the wiring diagram to robert@mobilehomerepair.com and I'll see what I can tell you.
Take care and best wishes,
Robert
Some people are Humbly Grateful, while some are Grumbly Hateful.................... Which one are you ?
-
- Similar Topics
- Replies
- Views
- Last post
-
- 0 Replies
- 42047 Views
-
Last post by David DeBord
Sun Oct 22, 2017 7:13 am
-
-
have intertherm heat pump with a 913421 control box tying to a miller 841 thermo stat ,
by hillcat01 » Mon Oct 21, 2019 7:28 pm » in Nordyne Service & Repair - 0 Replies
- 86936 Views
-
Last post by hillcat01
Mon Oct 21, 2019 7:28 pm
-
-
-
Evcon Heat Pump - Air Conditioner Model No. BRHS036B Making HUM Before Starting
by Dave_L » Tue Aug 29, 2023 1:26 am » in Coleman Service & Repair - 0 Replies
- 126536 Views
-
Last post by Dave_L
Tue Aug 29, 2023 1:26 am
-
-
-
Coleman 3400A812 blower wiring
by Jeff Rose » Mon Mar 02, 2020 9:51 am » in Coleman Service & Repair - 0 Replies
- 120759 Views
-
Last post by Jeff Rose
Mon Mar 02, 2020 9:51 am
-
-
-
Heat strips are on, but not the fan.
by Forestbrook » Sat Dec 08, 2018 6:09 pm » in Coleman Service & Repair - 0 Replies
- 42150 Views
-
Last post by Forestbrook
Sat Dec 08, 2018 6:09 pm
-