need advice on air compressor
Moderators: Greg, Mark, mhrAJ333, JD
- Busybee1952
- Posts: 97
- Joined: Fri Aug 10, 2007 10:37 am
- Location: Hesperia, MI
- Contact:
I can't even staple anything without having to pound the staple the rest of the way in with a hammer! I'm thinking of buying a portable air compressor that would staple, nail, paint, and screw. It would have to run off 110 and not 220 and not be too difficult to move around, plus, it would have to be pretty cheap. Anyone have suggestions as to size, brand, cost and advantages? Thanks.
With courage you will dare to take risks, have the strength to be compassionate and the wisdom to be humble. Courage is the foundation of integrity ..... Nair, Keshavan
One unit that will fit all your criteria probably does not exist. Painting would require a larger unit with a large tank and works better with higher horsepower ratings. Screwing is not really done pneumatic. It might be better to get a small compressor unit to run nail and staple guns, and one of the small wagner painters for painting.
A pro will wear out the bargain brand units in no time and they are more prone to have problems. Even for occasional DIY, quality is usually cheaper in the long run. That being said, a bargain brand 2 gal compressor from Harbor Freight is probably around a hundred bucks or less. Their nailers and staplers are VERY inexpensive, but they are cheap at the same time This is probably the cheapest option for purchasing new equipment, but not my recommendation.
Porter Cable and Bostitch gets very high ratings and are comparable to other name brands found in the home stores. Home stores will carry a "B" grade line of tools, Like Kobalt, which will be cheaper and probably a step above Harbor Freight tools.
My recommendation would be to go with one of the small Porter Cable or Bostitch 2gal to 6 gal compressor combo kits. Bostitch has one with a 2 gal compressor and a gun that will use staples or brad nail. I have a Porter Cable that I bought many years ago that comes with a brad nailer and a 2" 16ga finish nailer. They have a kit at the same price now that also includes a stapler. These units will cost $200 to $230 or so.
Keep in mind that these small nailers and staplers are only for small jobs. You can not do framing or other heavier work with them. A framing gun will run at least $220 in a decent brand name. We have 8 different guns, not including the used one we bought that never worked right. So you can see that a full assortment of tools will be pretty expensive.
One last suggestion that might work for you. The 2 gal compressor mentioned above weighs about 40 pounds, and is considered a small unit. It is more than my wife wants to lug around, due to it's shape and awkwardness. There are these very tiny true compressors (not inflators) available. I have not used them, so can't really rate them. But here is a web site selling reconditioned Campbell Hausfeld in like new condition. They have one there that is 1 gal and only 18 pounds. It only has a .39 cfm, but should be adequate for a nailer or stapler. They are showing a price of $50. That and some Harbor Freight guns might work for you.
Air Compressors Direct
http://www.aircompressorsdirect.com/cat ... cts_id=560
Harbor Freight, compressors (use links to see other tool types)
http://search.harborfreight.com/cpisear ... &Submit=Go
Home Depot, Porter Cable, 3 gun combo $289
Do a search on - Porter Cable Three Nailer/compressor Combo Kit Model CFNBNS
(the link was too long for this forum screen)
Hope this helps
JD
A pro will wear out the bargain brand units in no time and they are more prone to have problems. Even for occasional DIY, quality is usually cheaper in the long run. That being said, a bargain brand 2 gal compressor from Harbor Freight is probably around a hundred bucks or less. Their nailers and staplers are VERY inexpensive, but they are cheap at the same time This is probably the cheapest option for purchasing new equipment, but not my recommendation.
Porter Cable and Bostitch gets very high ratings and are comparable to other name brands found in the home stores. Home stores will carry a "B" grade line of tools, Like Kobalt, which will be cheaper and probably a step above Harbor Freight tools.
My recommendation would be to go with one of the small Porter Cable or Bostitch 2gal to 6 gal compressor combo kits. Bostitch has one with a 2 gal compressor and a gun that will use staples or brad nail. I have a Porter Cable that I bought many years ago that comes with a brad nailer and a 2" 16ga finish nailer. They have a kit at the same price now that also includes a stapler. These units will cost $200 to $230 or so.
Keep in mind that these small nailers and staplers are only for small jobs. You can not do framing or other heavier work with them. A framing gun will run at least $220 in a decent brand name. We have 8 different guns, not including the used one we bought that never worked right. So you can see that a full assortment of tools will be pretty expensive.
One last suggestion that might work for you. The 2 gal compressor mentioned above weighs about 40 pounds, and is considered a small unit. It is more than my wife wants to lug around, due to it's shape and awkwardness. There are these very tiny true compressors (not inflators) available. I have not used them, so can't really rate them. But here is a web site selling reconditioned Campbell Hausfeld in like new condition. They have one there that is 1 gal and only 18 pounds. It only has a .39 cfm, but should be adequate for a nailer or stapler. They are showing a price of $50. That and some Harbor Freight guns might work for you.
Air Compressors Direct
http://www.aircompressorsdirect.com/cat ... cts_id=560
Harbor Freight, compressors (use links to see other tool types)
http://search.harborfreight.com/cpisear ... &Submit=Go
Home Depot, Porter Cable, 3 gun combo $289
Do a search on - Porter Cable Three Nailer/compressor Combo Kit Model CFNBNS
(the link was too long for this forum screen)
Hope this helps
JD
☯JD♫
Today is PERFECT!
All information and advice given is for entertainment and informational purposes only. The person doing the work is solely responsible to insure that their work complies with their local building code and OSHA safety regulations.
Today is PERFECT!
All information and advice given is for entertainment and informational purposes only. The person doing the work is solely responsible to insure that their work complies with their local building code and OSHA safety regulations.
Also, don't forget that you can rent the type you need for the job you are doing at your local rental center. This would save you a little money I think. Around here, we often rent tools on saturdays and return them on monday afternoons and we are only charged for one full day because the centers are closed on sundays.
-Bob
-Bob
- Busybee1952
- Posts: 97
- Joined: Fri Aug 10, 2007 10:37 am
- Location: Hesperia, MI
- Contact:
Thanks guys. I think that the universe is watching out for me because I made this post and then later went to the hardware store for something and there was an ad posted there that someone had a portable air compressor and some accessories for sale. Dang! So I called and went to look at the goods. I got the portable air compressor, brad nailer and a bunch of brads, like 5 boxes, and some other odds and ends, all for $50.00! Now, I realize that it won't do all the things I had hoped but I think it will be real helpful for me. Here's what I got, all in perfect shape with instruction manuals.
http://www.everyaircompressor.com/asp/s ... rodDetails
http://doitbest.com/main.aspx?pageid=64 ... ciate=true
Ok, so it's not the "big boy" tools but I'm not a big boy, lol.
Thanks to all for your help and suggestions.
http://www.everyaircompressor.com/asp/s ... rodDetails
http://doitbest.com/main.aspx?pageid=64 ... ciate=true
Ok, so it's not the "big boy" tools but I'm not a big boy, lol.
Thanks to all for your help and suggestions.
With courage you will dare to take risks, have the strength to be compassionate and the wisdom to be humble. Courage is the foundation of integrity ..... Nair, Keshavan
- Brenda (OH)
- Posts: 325
- Joined: Sun Apr 01, 2007 7:57 am
BusyBee,
I am SO jealous! please email me the first time you nail paneling with the toy, I mean tool!
I have developed arthritis in the first joint of one of my fingers from whacking it with the hammer so many times when nailing things.
wish I was only joking.
Brenda
I am SO jealous! please email me the first time you nail paneling with the toy, I mean tool!
I have developed arthritis in the first joint of one of my fingers from whacking it with the hammer so many times when nailing things.
wish I was only joking.
Brenda
-
- Similar Topics
- Replies
- Views
- Last post
-
-
Need advice on blower
by NorthTexasSafariGuy » Mon Jul 31, 2017 9:18 am » in Coleman Service & Repair - 0 Replies
- 70715 Views
-
Last post by NorthTexasSafariGuy
Mon Jul 31, 2017 9:18 am
-
-
-
1989 Champion, entrance door issue, need advice
by hotrod53 » Mon Dec 30, 2019 5:33 pm » in Mobile Home Repair - 3 Replies
- 47568 Views
-
Last post by Greg
Tue Dec 31, 2019 7:27 pm
-
-
-
Need advice regarding a heat\AC register location
by JustRayInWi » Mon Aug 24, 2020 8:49 pm » in Mobile Home Repair - 2 Replies
- 18324 Views
-
Last post by JustRayInWi
Thu Aug 27, 2020 3:38 pm
-
-
- 0 Replies
- 126492 Views
-
Last post by dan.zawxx
Mon Oct 12, 2020 9:01 pm
-
- 0 Replies
- 126088 Views
-
Last post by dan.zawxx
Mon Oct 12, 2020 9:03 pm