![Image](http://mobilehomerepair.com/phpbb/userpix/716_rsz_152_Crooked_Islans_Circle_030_1.jpg)
I made a line on the left shutter to show the cracks, if you can see it.
These shutters are cracked horizontally in 2 places each. Roughly split into thirds.
#1--What is the best way to treat the oxidation?
#2--Is there a cement that I can pump into the cracks that will fill them and hold them together better till I can afford new ones?
Apparently over the years the vinyl expanded at two points where they were screwed to the siding, pulling them apart like a medieval torture.
Any thoughts?