![Sad :(](./images/smilies/icon_sad.gif)
DLAS056BDF
![Sad :(](./images/smilies/icon_sad.gif)
Hi,
One limit is up beside the blower housing and the other is down beside the control box.
Yes, it is an electronic ignition (Hot Surface Ignitor).
The switch in the ON position is a Fan Continous position and fan runs all the time, nothing else is supposed to come on then unless you have t-stat set for a call for heat.
If the upper limit has a reset button, push that and see if it starts up.
Other than that, need to call a Tech to locate problem(s).
Don't have any info on a manual for it.
Take care and best wishes,
Robert
One limit is up beside the blower housing and the other is down beside the control box.
Yes, it is an electronic ignition (Hot Surface Ignitor).
The switch in the ON position is a Fan Continous position and fan runs all the time, nothing else is supposed to come on then unless you have t-stat set for a call for heat.
If the upper limit has a reset button, push that and see if it starts up.
Other than that, need to call a Tech to locate problem(s).
Don't have any info on a manual for it.
Take care and best wishes,
Robert
Some people are Humbly Grateful, while some are Grumbly Hateful.................... Which one are you ?