RE: Coleman Presidential II, M/N 3115A751: Blower will not s
Posted: Sun Jun 01, 2008 12:23 am
Hi,
Yes, temp should be 75* or above if possible. Furnace contains blower, a/c control box and a-coil, so should be part of an a/c service call always.
Gauge reading can be low and refrigerant charge still be ok, reason for leak inspection.
Refrigerant does not use itself up, only way to be low is from a leak.
Understand situation that leads to having to "hide" DIY.
The sequencer p/n given earlier can be seen and ordered through PayPal at the link given.
You can also call toll free after 9 AM CST Mon thru Fri to 1-877-263-7860 and charge to Visa or Mastercard.
Take care and best wishes,
Robert
Yes, temp should be 75* or above if possible. Furnace contains blower, a/c control box and a-coil, so should be part of an a/c service call always.
Gauge reading can be low and refrigerant charge still be ok, reason for leak inspection.
Refrigerant does not use itself up, only way to be low is from a leak.
Understand situation that leads to having to "hide" DIY.
The sequencer p/n given earlier can be seen and ordered through PayPal at the link given.
You can also call toll free after 9 AM CST Mon thru Fri to 1-877-263-7860 and charge to Visa or Mastercard.
Take care and best wishes,
Robert