Page 1 of 1

Tub faucet repair

Posted: Thu Feb 13, 2014 8:37 pm
by AbbottsManor
Well my 23 year old tub faucet has started to drip.
Is there a way to repair this type of faucet or is it a lost cause?
faucet.jpg

Re: Tub faucet repair

Posted: Thu Feb 13, 2014 11:40 pm
by DaleM
Replace it, they are not that expensive. 23 years it's way past it's useful life!!

Re: Tub faucet repair

Posted: Fri Feb 14, 2014 1:24 pm
by UmpJJ
There are LOTS of DIY videos on faucet repair on Youtube. Have at it!

UmpJJ

Re: Tub faucet repair

Posted: Fri Feb 14, 2014 2:42 pm
by Steve-WA
That's one of those chintzy faucets that just has screw-down plastic nuts behind the wall, just like a regular kitchen faucet. *If* you have access behind the wall, you can replace the whole thing for like $25.

And by chintzy, I mean MH - specific.

Re: Tub faucet repair

Posted: Fri Feb 14, 2014 2:56 pm
by Greg S
Fixing a faucet that old is like taking a old dog to the vet when it gets sick, it's a waste of both time and money. Just put it out of it's misery.

Re: Tub faucet repair

Posted: Fri Feb 14, 2014 10:19 pm
by countrydan
I respectfully dsagree.

You can remove the plastic handles and then you should be able to remove the cartridges under the handle that control the water and simply replace those. Of course shut off the water and drain the residual pressure then attempt this. If you damage anything then replace the whole unit otherwise you most likely have brass cartridges that are good quality and easy to remove and replace..

If your brand is a Phoenix like mine, there's easy directions on their website. My rebuild pairs in each faucet cost me $11 and change :)

Re: Tub faucet repair

Posted: Sat Feb 15, 2014 8:40 am
by Greg
Price it both ways if you can find the parts, then you decide what works best for you.

Greg

Re: Tub faucet repair

Posted: Sat Feb 15, 2014 12:12 pm
by JD
I don't think this faucet has a cartridge. It looks like a plastic MH faucet. I replace these with Moen Alders or Caldwells, but this usually requires adding some wood to secure the faucet. For DIY, you could just buy another MH faucet like this. They will easily attach with big plastic nuts around the pipe connections tightening to the thickness of paneling. This makes installing one that is connected in the water heater compartment, right next to the water heater possible.

This is not a great faucet, but it is really cheap (like $30) and should last a min 10 years. I have customers cussing these things when I replace them and they are 30-40 years old! YMMV

Re: Tub faucet repair

Posted: Sun Feb 16, 2014 8:36 pm
by AbbottsManor
Never mind, it stopped dripping! Here's to another 23 years lol.
I'm actually getting estimates together to replace the tub with a shower pan, so it doesn't have to last that much longer.

Thanks for all the replies!

Chris