Page 1 of 1
Vinyl U_channel for Hot water tank cover.
Posted: Sun Dec 14, 2014 12:56 am
by FLIENLOW
Hi All-
During my remodel I have managed to loose the Vinyl Molding that goes around the 1/4" drywall cover for the hot water tank closet. I have search high and low at the home stores, google has failed me. Does anyone know where I can get some?
Or have any ideas or a work around for the 1/4 dry cover?
Thanks!
Re: Vinyl U_channel for Hot water tank cover.
Posted: Sun Dec 14, 2014 6:04 am
by Norm Frechette
GOOGLE found this. click on an image to see if its right for you
https://www.google.com/search?q=plastic ... CAcQ_AUoAg
Re: Vinyl U_channel for Hot water tank cover.
Posted: Sun Dec 14, 2014 9:50 am
by Greg
Try taking a walk through the vinyl siding section at Lowes or H.D. and see that may work. For a couple of bucks you can get creative and try some things.
Greg
Re: Vinyl U_channel for Hot water tank cover.
Posted: Sun Dec 14, 2014 11:57 am
by JD
They make a plastic trim for those pebble grain FRP (fiberglass reinforced panel) used in bathrooms.The panels are"old school" like you would find in a gas station or seedy bar bathroom. Just ask someone in the lumber section for FRP panel trim.
Re: Vinyl U_channel for Hot water tank cover.
Posted: Tue Dec 16, 2014 1:03 am
by FLIENLOW
I have found nothing that will work
Re: Vinyl U_channel for Hot water tank cover.
Posted: Tue Dec 16, 2014 8:38 am
by Norm Frechette
FLIENLOW wrote: have any ideas or a work around for the 1/4 dry cover?
there is absolutely no molding in your local lowed or home depot that would work??? something like the 2 on the left and the one at top right??
Re: Vinyl U_channel for Hot water tank cover.
Posted: Thu Dec 18, 2014 2:14 pm
by JD
http://www.homedepot.com/p/Stabilit-3-1 ... /202083288
3/16ths but should be able to squeeze over 1/4" enough to trim it
If you do not have a local Home Depot or your HD does not carry it, it is a very common building product and someone in your area should have it.