Wet crossover duct insulation
Posted: Thu Jun 04, 2015 6:13 pm
So I was poking around under my house preparing for a flood when I came across my crossover duct
It's saggy on one side the side opposite the av blower unit.
I checked it out and the insulation is soaked through.
I can't figure out where the water came from.
I cut into the insulation and checked the actual plastic duct part. No water there.
I checked for leaks around the connection point to the house that might be dropping down next to the vent. Nothing.
I guess I'm going to have to take the duct completely off and dry it out in the sun or replace it.
Any thoughts??
It's saggy on one side the side opposite the av blower unit.
I checked it out and the insulation is soaked through.
I can't figure out where the water came from.
I cut into the insulation and checked the actual plastic duct part. No water there.
I checked for leaks around the connection point to the house that might be dropping down next to the vent. Nothing.
I guess I'm going to have to take the duct completely off and dry it out in the sun or replace it.
Any thoughts??