Washer not draining -- but no front door
Moderators: Greg, Mark, mhrAJ333, JD
-
- Posts: 17
- Joined: Sat Jul 23, 2016 1:28 am
I went to put the washed clothes in the dryer. The washer stopped way full of water and I have a flood. I looked online to see what to do. I put the lid down and pushed the switch, got a hum. Is probably a clog in pump or hose. THE PROBLEM: Online tells me to remove the front panel, but there is no separate front panel. It is all one piece from front to back. Right now, I can't get it out cuz of all the water in it. Even empty, there is not much room to move it in the pantry. What do I do?
-
- Posts: 17
- Joined: Sat Jul 23, 2016 1:28 am
Thanks, Greg. I used up a LOT of towels. They are currently hanging on the porch in the falling snow. LOL
-
- Posts: 17
- Joined: Sat Jul 23, 2016 1:28 am
I had my friend replace 3 parts that could all be culprit. Got 'em online, so didn't cost a fortune. Found instructions on removing the cabinet and replacing those parts and it now works perfectly.
-
- Similar Topics
- Replies
- Views
- Last post
-
-
how do I replace a front door with built in storm door?
by truckinusa » Thu Oct 18, 2018 9:30 pm » in Mobile Home Repair - 0 Replies
- 35856 Views
-
Last post by truckinusa
Thu Oct 18, 2018 9:30 pm
-
-
- 4 Replies
- 14174 Views
-
Last post by nestsman
Mon Aug 21, 2017 5:07 pm
-
- 4 Replies
- 16633 Views
-
Last post by nestsman
Sun Apr 29, 2018 4:42 pm
-
- 2 Replies
- 10803 Views
-
Last post by Greg
Fri Apr 10, 2020 8:58 am
-
-
Heat strips are on, but not the fan.
by Forestbrook » Sat Dec 08, 2018 6:09 pm » in Coleman Service & Repair - 0 Replies
- 42150 Views
-
Last post by Forestbrook
Sat Dec 08, 2018 6:09 pm
-