Porch roof - can I put plywood on it to support me?
Posted: Fri Sep 28, 2018 10:48 am
My 1974 mobile home has a good porch roof that is corrugated and has nice pink stars printed on the underside. It appears sturdy enough to support a 4 by 8 sheet of plywood 1/2 inch thick or more. I need to go out on the roof to clean up and seal up the metal flashing that is at a 45 degree angle from the edge of the home roof down to the surface of a flat steel plate over the corrugated pieces.
Pictures are here - http://thorwaldsonwholehousefans.com/bl ... orch-roof/
Pictures are here - http://thorwaldsonwholehousefans.com/bl ... orch-roof/