Coleman model DGAA070BDTA is blowing luke warm air when it starts. Diagnostic light is steady green. blower seems okay. Any ideas on what to look for? By the way it workd fine just last week when I checked it out after changing filters.
Thanks! you guys rock!
DGAA070BDTA blowing luke warm air.
Are you in a double, single or triple wide ? Have you checked main duct trunkline(s) to see if there's an opening ?
Does burner flame appear to be big enough across length of burner tube ?
Is burner flame same as before ?
Thanks,
Robert
Does burner flame appear to be big enough across length of burner tube ?
Is burner flame same as before ?
Thanks,
Robert
Some people are Humbly Grateful, while some are Grumbly Hateful.................... Which one are you ?
I figured it out. There was a spider nest tightly compacted into the gas jet coming into the burner. Would have never thought of that!
Thanks!@
Thanks!@
LOL, yep, that's where my questions were heading. Usually you'll see a difference in burner flame and then I say look for spiders web in orifice at burner.
A search would locate plenty of those suggestions on here.
Spiders love those during off season.
Glad you found it and now know a common failure location.
Take care and best wishes,
Robert
A search would locate plenty of those suggestions on here.
Spiders love those during off season.
Glad you found it and now know a common failure location.
Take care and best wishes,
Robert
Some people are Humbly Grateful, while some are Grumbly Hateful.................... Which one are you ?
-
- Similar Topics
- Replies
- Views
- Last post
-
-
Intertherm standing pilot LPG burner 77 BTU IN gas valve mounting plate gets hot ( not warm).
by justplumducky » Sat Sep 09, 2017 3:34 am » in Nordyne Service & Repair - 1 Replies
- 74891 Views
-
Last post by Maxwell.lipphardt
Thu Nov 22, 2018 10:15 am
-
-
-
Model DGAA070BDTA venting kit needed.
by spazatac » Fri May 24, 2024 11:21 am » in Coleman Service & Repair - 2 Replies
- 665 Views
-
Last post by spazatac
Mon Jun 10, 2024 3:11 pm
-
-
-
Ducts barely blowing - what to check first?
by caligirl » Fri Nov 25, 2022 1:21 pm » in All Other HVAC Questions - 0 Replies
- 112938 Views
-
Last post by caligirl
Fri Nov 25, 2022 1:21 pm
-
-
-
DGAT Series furnace air-conditioning issue
by minnie1967 » Thu Jul 13, 2017 9:48 am » in Coleman Service & Repair - 0 Replies
- 61916 Views
-
Last post by minnie1967
Thu Jul 13, 2017 9:48 am
-
-
-
Disable Blend Air ll Attic fan
by 777stickman » Fri Nov 17, 2017 5:05 pm » in Coleman Service & Repair - 0 Replies
- 44410 Views
-
Last post by 777stickman
Fri Nov 17, 2017 5:05 pm
-