mobilehomerepair.com

Greetings from NH.

My first time cleaning and doing some routine maintenance on this furnace. Model # CMF 80 PO CONV.
Is there a port hole to sqirt some oil for the blower motor? I can't seem to find it. There is no balance problem or vibration. I just want to know for when I do this routine maintenance.

Thanks as always
Bob

Hi Bob,


It should say on motor lable if it is manually oiled or self lubricated.


If manually oiled, it will have two oil ports across from each other along the outer rim/edge of motor.

Look for small metal or plastic plugs with flat heads or if missing, look for the two small holes.


If unsure, give me info on motor and I'll check on it tomorrow and see what I can find.



Thanks,
Robert