Low Air Flow from Registers
Posted: Mon Oct 22, 2007 12:30 am
I have a Coleman furnance that is not working up to par. When the blower motor runs during the heat cycle, little warm air blows out of most of the registers. A couple of the registers nearest the furnace produce the most heat. I can tell there is some air flow through all of the registers, however, by putting a tissue to the register and seeing if it moves - whcih it does. Last year, the registers would produce quite a bit of heat, but this is not the case this year.
I did have an earlier post in this forum about having a noisy blower, which I have not totaly fixed. The noise has been reduced by itself, but is still there. Could this have something to do with my new issue?
Thanks!~
I did have an earlier post in this forum about having a noisy blower, which I have not totaly fixed. The noise has been reduced by itself, but is still there. Could this have something to do with my new issue?
Thanks!~