Page 1 of 1

Roof Fan

Posted: Tue Nov 13, 2007 9:28 am
by Husty
my roof fan runs continually. I followed you repair procedure and found that the 4 wire connector from the roof fan is not connected to anything at the furnace. I do not find a lower control box. where do I start? I purchased the mobile home in March of this year.

RE: Roof Fan

Posted: Tue Nov 13, 2007 9:54 am
by Robert
Do you have a Coleman Furnace with Blend Air system or a Miller/Intertherm with VentilAire system ?



Thanks,
Robert

Posted: Tue Nov 13, 2007 2:10 pm
by Husty
The mobile home is now closed for the winter. I am going to find out the information that you require. Thank you for your quick response
Husty

RE: Roof Fan

Posted: Sat Nov 24, 2007 5:27 pm
by Husty
Robert, The furnace is a Coleman model no. 7956C856 , sn 920877580.
Thanks for your help.

RE: Roof Fan

Posted: Sun Nov 25, 2007 1:39 am
by Robert
Hi,

Sounds like there are missing components, you'll need to determine what is missing.


It may not be repairable. You may be better off replacing the system.

You could replace missing parts only to find the others don't work.




Thanks,
Robert

RE: Roof Fan

Posted: Sun Nov 25, 2007 7:03 am
by Husty
Robert,
Where could I find the parts list and system description?
I think a this point I need a service manual or all of the specs for the system.
Thanks again for your help.

RE: Roof Fan

Posted: Sun Nov 25, 2007 9:17 pm
by Robert
Hi,

Mark sells Wiring & Parts Diagrams and Manuals where available.


Go here and follow steps:

http://www.mobilehomerepair.com/wireandparts.html



Thanks,
Robert