burner won't stay lit...chokes out
coleman #7956A856.standing pilot........I put new roof on trailer and simply extended chimney.......converted from nat gas to LP....pilot stays lit....burner lites but goes out when peephole is closed....new orfice,thermocoupler,and thermostat.....would that have something to do with roof jack..chimney length ...combustion air?????...what is the fix???? Rob
no I didn't use a coleman roof jack...but just now I noticed the data chart on the furnace..so I'll measure from the top of the furnace to the top of the roof and check the chart and order the proper roof jack from your website to start with....any other suggestions for me Robert??
Hi,
See what that does first. You must have the correct roof-jack and any extensions for the furnace.
You'll need the hydroment sealant to seal around the flashing and swivel joints.
Thanks,
Robert
See what that does first. You must have the correct roof-jack and any extensions for the furnace.
You'll need the hydroment sealant to seal around the flashing and swivel joints.
Thanks,
Robert
Some people are Humbly Grateful, while some are Grumbly Hateful.................... Which one are you ?
-
- Similar Topics
- Replies
- Views
- Last post
-
- 2 Replies
- 20916 Views
-
Last post by TorstenW
Tue Mar 06, 2018 1:04 am
-
-
intertherm standing pilot propane burner Heat Rise of 38°F spread.
by justplumducky » Fri Aug 25, 2017 10:06 am » in Nordyne Service & Repair - 0 Replies
- 55118 Views
-
Last post by justplumducky
Fri Aug 25, 2017 10:06 am
-
-
-
Intertherm standing pilot LPG burner 77 BTU IN gas valve mounting plate gets hot ( not warm).
by justplumducky » Sat Sep 09, 2017 3:34 am » in Nordyne Service & Repair - 1 Replies
- 74891 Views
-
Last post by Maxwell.lipphardt
Thu Nov 22, 2018 10:15 am
-
-
-
Colman evcon presidental 7980B856 furnace will not stay on
by ezridersid » Sat Dec 21, 2019 8:52 pm » in Mobile Home Repair - 1 Replies
- 17302 Views
-
Last post by ezridersid
Sat Dec 21, 2019 9:04 pm
-
-
-
Need to remove a stripped Allen wrench-type plug from the OUT PRESS port on top of gas valve
by justplumducky » Fri Aug 25, 2017 8:21 am » in Nordyne Service & Repair - 1 Replies
- 49078 Views
-
Last post by Maxwell.lipphardt
Mon Feb 04, 2019 6:29 am
-