mobilehomerepair.com

I have a Evcon DGAA070BDTB and the blower won't kick on. I've tried shutting everything completely off including the gas and turning everything back on. It sounds like it going to start but the blower never kicks on.

This was installed on 10-13-06

Does the burner run and does the furnace get hot? Is it just the blower than is not working?

The burner runs and gets hot...It sounds like its going to kick on and then about the time the blower is suppossed to kick on it doesn't.

I noticed this morning there are 3 flashing lights in the hole next to the on/off switch.

Go here on left side :

http://www.mobilehomerepair.com/ColemanGas.html



Locate Remote Flame Sensor # 025-35354-000



Click on pic for enlarged view.


Then follow these tips :


http://www.mobilehomerepair.com/TechTip1.html



Aside from this, best to call a Tech to take a loos at it.

Could also be a blockage in main burner orifice (spider/web)


Thanks,
Robert

Thank you so much for your help.

I was able to get a tech out here from our local gas company tonight and it turned out to be the combustion chamber and the pressure switch were both bad. Luckily, I had purchased the service guard plan through them and so it didn't cost me anything and I have heat!

Thank you!

Hi Linda,

That's great and you're very welcome.



Thanks,
Robert