nordyne elec furnace part
-
- Posts: 14
- Joined: Tue Feb 27, 2007 11:16 pm
I have a nordyne E2EB-015HR I WAS TOLD IT NEEDS SEQUENCERS AND A FAN RELAY....IT WILL COST $1100.00...CAN YOU HELP ME GET THE PARTS?
Hi,
We have the parts. The Sequencer and Relay plus shipping totals $60.
If you are slightly handy with tools/repairs, this is a definate DIY task.
$1,100 is a rip and absurd.
What is the furnace doing in case it was misdiagnosed ?
Take care and best wishes,
Robert
We have the parts. The Sequencer and Relay plus shipping totals $60.
If you are slightly handy with tools/repairs, this is a definate DIY task.
$1,100 is a rip and absurd.
What is the furnace doing in case it was misdiagnosed ?
Take care and best wishes,
Robert
Some people are Humbly Grateful, while some are Grumbly Hateful.................... Which one are you ?
-
- Posts: 14
- Joined: Tue Feb 27, 2007 11:16 pm
the furnace will come on when you set the thermostat.....it stays on for about 5 min. then it shuts off for about 2 min. until it reaches the temp you set on the thermostat.
-
- Posts: 14
- Joined: Tue Feb 27, 2007 11:16 pm
it does that continually untill it reaches temp
Do you have A/C also or just Heat ?
If you have A/C also, switch t-stat to Cool and see if blower remains on through the cycle.
If so, you most likely just need a Sequencer.
Take care and best wishes,
Robert
If you have A/C also, switch t-stat to Cool and see if blower remains on through the cycle.
If so, you most likely just need a Sequencer.
Take care and best wishes,
Robert
Some people are Humbly Grateful, while some are Grumbly Hateful.................... Which one are you ?
-
- Posts: 14
- Joined: Tue Feb 27, 2007 11:16 pm
NO I DON'T HAVE AC......I DID FORGET TO MENTION THAT THE REPAIR TEC THAT LOOKED AT MY UNIT SAID THE T-STAT WAS WIRED INCORECTLY. HE SWITCHED SOME OF THE CONNECTIONS AND THE UNIT RAN FOR A LITTLE LONGER BUT SOON STARTED TO CYCLE ON AND OFF AGAIN LIKE BEFORE.
Hi,
If this is the same person who quoted you $1,100 to repair it, can you tell me what color wire is connected to what letter terminal on t-stat?
Thanks,
Robert
If this is the same person who quoted you $1,100 to repair it, can you tell me what color wire is connected to what letter terminal on t-stat?
Thanks,
Robert
Some people are Humbly Grateful, while some are Grumbly Hateful.................... Which one are you ?
-
- Posts: 14
- Joined: Tue Feb 27, 2007 11:16 pm
IT WAS THE SAME PESON WHO GAVE ME THE ESTIMATE.....I WILL GET YOU THE INFO LATER TODAY WHEN I GET HOME FROM WORK.....THANKS FOR YOUR HELP
Hi,
You're very welcome. With that absurd estimate, I tend to not trust this guy and want to be sure he has not done something dishonest.
Although, that estimate itself was dishonest .
Thanks,
Robert
You're very welcome. With that absurd estimate, I tend to not trust this guy and want to be sure he has not done something dishonest.
Although, that estimate itself was dishonest .
Thanks,
Robert
Some people are Humbly Grateful, while some are Grumbly Hateful.................... Which one are you ?
-
- Posts: 14
- Joined: Tue Feb 27, 2007 11:16 pm
The make of the t-stat is a White Rogers, I had the white wire connected to the WH terminal, and the red wire connected to the 4M terminal. He removed the red wire and put it to the RV terminal.
He left the white wire to the WH terminal. I hope that is what you need to know.......let me know, thanks......Roger
He left the white wire to the WH terminal. I hope that is what you need to know.......let me know, thanks......Roger
What is the model number of the t-stat ?
Had the furnace been working fine with the t-stat connected as you had it, then suddenly stopped ?
Thanks,
Robert
Had the furnace been working fine with the t-stat connected as you had it, then suddenly stopped ?
Thanks,
Robert
Some people are Humbly Grateful, while some are Grumbly Hateful.................... Which one are you ?
-
- Posts: 14
- Joined: Tue Feb 27, 2007 11:16 pm
No it was malfunctioning when I got the house about eight months ago. I just now have had the time and money to fix things. At first when it was not working right I tried replacing the t-stat and filter, then is when I called the company to check it out. So its been doing the same thing the whole time.
-
- Posts: 14
- Joined: Tue Feb 27, 2007 11:16 pm
Sorry I forgot the model #1F56-306 White Rogers
Hi,
That White-Rodgers T-Stat # 1F56-306 should have the following terminals:
4, W, R, Y, G
IF you only have two wires, the White goes to W and the Red to R.
I believe that is how it is wired now.
Do you have or have access to a Multi-Meter to test voltages and do you feel comfortable doing so ?
If so, you can test the sequencer and blower relay to see if they're faulty.
I believe that the sequencer is the problem, but w/o testing can't say for sure.
Without testing, I would suggest buying both the sequencer and blower relay and replacing them yourself for best chance of solving this problem.
The only absolute way is to test or call a reputable Tech, but based on what info you have given and my 27+ years in this business, I believe that the sequencer and blower relay both being replaced will resolve this issue.
I'm not there though, so can only give my advice based on the limited info I have.
If you have or can get a meter and want to test them, let me know.
Thanks,
Robert
That White-Rodgers T-Stat # 1F56-306 should have the following terminals:
4, W, R, Y, G
IF you only have two wires, the White goes to W and the Red to R.
I believe that is how it is wired now.
Do you have or have access to a Multi-Meter to test voltages and do you feel comfortable doing so ?
If so, you can test the sequencer and blower relay to see if they're faulty.
I believe that the sequencer is the problem, but w/o testing can't say for sure.
Without testing, I would suggest buying both the sequencer and blower relay and replacing them yourself for best chance of solving this problem.
The only absolute way is to test or call a reputable Tech, but based on what info you have given and my 27+ years in this business, I believe that the sequencer and blower relay both being replaced will resolve this issue.
I'm not there though, so can only give my advice based on the limited info I have.
If you have or can get a meter and want to test them, let me know.
Thanks,
Robert
Some people are Humbly Grateful, while some are Grumbly Hateful.................... Which one are you ?
-
- Posts: 14
- Joined: Tue Feb 27, 2007 11:16 pm
I do have a meter, but from what you have told me and the tec that was here I would like to just go ahead and replace the sequencers and relay. If you could give me the part #s I will order them from You?......are there two sequencers or just one?
Thanks so much for your help, after i get the parts installed I will let you know how it went..........Roger
Thanks so much for your help, after i get the parts installed I will let you know how it went..........Roger
-
- Similar Topics
- Replies
- Views
- Last post
-
-
Eb15a elec furnace will only come on if jumpered at themostat
by redcat31 » Wed Jan 31, 2018 6:18 pm » in Service & Repair of Other Brands - 0 Replies
- 23423 Views
-
Last post by redcat31
Sat Feb 03, 2018 1:20 am
-
-
-
EB15B Limit switch part # help
by ferret13sj » Thu Jan 18, 2018 11:46 pm » in Coleman Service & Repair - 0 Replies
- 48117 Views
-
Last post by ferret13sj
Thu Jan 18, 2018 11:46 pm
-
-
-
Intertherm/Nordyne feh-015ha furnace issues blower not working, unit will only turn off at breaker box
by onmypath78 » Sat Mar 16, 2019 12:11 pm » in Nordyne Service & Repair - 0 Replies
- 167493 Views
-
Last post by onmypath78
Sat Mar 16, 2019 12:11 pm
-
-
-
Nordyne M1B1 furnace issue - thermostat c wire not hooked up correctly. It's running off atteries instead
by Tallestt » Mon Apr 20, 2020 6:27 am » in Nordyne Service & Repair - 1 Replies
- 43411 Views
-
Last post by taurolyon
Tue Jun 23, 2020 4:02 pm
-
-
-
Nordyne M1MB clicks 4 times when starting
by olsonlaaa » Thu Aug 24, 2017 10:54 am » in Nordyne Service & Repair - 0 Replies
- 47693 Views
-
Last post by olsonlaaa
Thu Aug 24, 2017 10:54 am
-