Page 1 of 1
model 6806 electric furnace
Posted: Thu Dec 27, 2007 10:49 am
by jaydean21849
my heater does not heat all the time if i tap around on it it will come on the blower works fine just no heat any suggestions would help
thank you
RE: model 6806 electric furnace
Posted: Thu Dec 27, 2007 11:20 am
by jaydean21849
also while tapping on the sequencer i think i broke it on the top inbetween the terminals the element broke loose
RE: model 6806 electric furnace
Posted: Thu Dec 27, 2007 11:32 pm
by Robert
Hi,
Well, will need a new sequencer for sure. What is complete furnace model number, 6806-??? ?
Thanks,
Robert
RE: model 6806 electric furnace
Posted: Thu Dec 27, 2007 11:52 pm
by jaydean21849
do you have a wiring diagram for the sequencer i lost track of a couple of wires the only number i see is 6806
RE: model 6806 electric furnace
Posted: Fri Dec 28, 2007 12:11 am
by Robert
Go here to purchase wiring diagram if available:
http://www.mobilehomerepair.com/wireandparts.html
There should be a data label or paper sticker on furnace facing with the model number and furnace specs. Usually down near bottom near controls box area.
Thanks,
Robert