About Sequencer
Posted: Sat Jan 05, 2008 5:48 pm
When repair guy changed sequencer on coleman 3400A812 last month, he made a point of walking back into the room and offering to "get rid of that for you" Totally unnecessary and odd.
Can a sequencer be refurbished, and resold?
I'm asking because air coming up from register, is sometimes hot and sometimes barely warm.
He put in new(?) sequencer at the time, as well as used motor/blower, to replace original that had stopped blowing.
.
If the sequencer were faulty, would that make the heat element not come on sometimes?
The lower one was not working when he was here. I thought the sequencer was supposed to have fixed that.
Is that the sequencer's job, is what I'm asking.
I am waiting for him to come back and find the problem. In the meantime, many questions swirl thru my head
Thank you for responding.
Can a sequencer be refurbished, and resold?
I'm asking because air coming up from register, is sometimes hot and sometimes barely warm.
He put in new(?) sequencer at the time, as well as used motor/blower, to replace original that had stopped blowing.
.
If the sequencer were faulty, would that make the heat element not come on sometimes?
The lower one was not working when he was here. I thought the sequencer was supposed to have fixed that.
Is that the sequencer's job, is what I'm asking.
I am waiting for him to come back and find the problem. In the meantime, many questions swirl thru my head
Thank you for responding.