Coleman (Evcon) DGAA077BDTA LP furnance supplies luke warm
Posted: Wed Jan 23, 2008 11:51 am
I rented a mobil home with an Evcon DGAA077BDTA (made for Natural Gas, but converted to LP gas) furnace. A new install one year ago.
The air coming out of the vents is plenty, if not too much so, forceful. Air movement is quite impressive BUT........the temperature of the air is barely above room temperature.
Is there a way to increase the temperature that the "holding area" (sorry, ignorant of proper terms) gets warmer before the fan kicks in to push it into the ventilating system?
Or any other suggestions?
Furnace never "recycles" like some Ive had. What I mean by that is that the furnace stops, then recycles to do the air chamber being to warm??? to cool it more.
The air coming out of the vents is plenty, if not too much so, forceful. Air movement is quite impressive BUT........the temperature of the air is barely above room temperature.
Is there a way to increase the temperature that the "holding area" (sorry, ignorant of proper terms) gets warmer before the fan kicks in to push it into the ventilating system?
Or any other suggestions?
Furnace never "recycles" like some Ive had. What I mean by that is that the furnace stops, then recycles to do the air chamber being to warm??? to cool it more.