To make a long story short, my sewer froze and backed up and overflowed the toilet and ran down into the insulation. I cut the belly as soon as it happened to try to drain some liquid out however with it being -45 degrees celsius at the time alot of it froze. Now on the whole end of my mobile (1/4 of the length) the belly is hanging down considerably and all the liquid is frozen.
![Crying or Very sad :cry:](./images/smilies/icon_cry.gif)
Here is my problem, it is still in the -20 to -30 degree celsius range and it is far to cold for the tuck tape to stick on the belly (I tried cutting open a section of the belly and the tape wouldn't stick to seal it back up) so I cannot replace the insulation. I think probably about the bottom 2 inches of the insulation is frozen over the whole area.
Is there anything I can do before the spring? Or do I just leave it as is (a gigantic frozen mess).
Any help would be greatly appreciated.
Thanks in advance,
Andrwe