Page 1 of 1
Problem with Coleman DGAT056BDD
Posted: Thu Mar 13, 2008 8:42 pm
by jtgribble
I have a Coleman DGAT056BDD. It will run correctly through 2 or three cycles. Then, it goes out and will not restart. The diagnostic light strobes quickly and continuously, not in a numbered sequence. If I turn the power off and then restart it, the diagnostic light turns solid again, the furnace lights and it will run through 2 or three cycles. Does anyone have any ideas what the problem may be?
RE: Problem with Coleman DGAT056BDD
Posted: Fri Mar 14, 2008 1:49 am
by Robert
Hi,
That's usually indicative of a polarity issue, but with it working afterwards for a while, could be a circuit board going bad.
I would have a Tech check it to be sure.
Thanks,
Robert
RE: Problem with Coleman DGAT056BDD
Posted: Fri Mar 14, 2008 7:07 am
by jtgribble
Thank you very much!
RE: Problem with Coleman DGAT056BDD
Posted: Fri Mar 14, 2008 3:55 pm
by Robert
You're very welcome, happy to help.
Take care and best wishes,
Robert