Page 1 of 1
coleman presidental II
Posted: Fri Apr 18, 2008 11:00 am
by johnson84
i put the new seqencer in the unit but the elements still will not work on auto nor the fan anything else to try. the heater model # was 3120B750 the seqencer was # 3120A3571 thanks
RE: coleman presidental II
Posted: Sat Apr 19, 2008 2:00 am
by Robert
Do you have power to the sequencer ?
24VAC from t-stat to the bottom coil terminals, one meter lead on each side.
240VAC from top M1 to ground and 240VAC from M2 to ground ?
Have to find where the power stops.
T-Stat, transformer, limits and breakers could be at fault.
Thanks,
Robert