Page 1 of 1

Coleman DGAT056BDD No Action

Posted: Thu May 01, 2008 11:26 pm
by lonnyb
I just bought a park model trailer out at a local lake, the furnace looks like new but we can't get it going. I checked the gas supply and it is fine, I checked the circut board and the green light is flashing constantly. I looked in the manual and it says reverse polarity, where do I begin checking to see if this is correct?

RE: Coleman DGAT056BDD No Action

Posted: Fri May 02, 2008 3:52 am
by Robert
At the board and backwards from there to see if hot and neutral wires have been connected backwards with each other.



Thanks for inquiring,
Robert

RE: Coleman DGAT056BDD No Action

Posted: Fri May 02, 2008 7:25 am
by lonnyb
Thank you Robert, any idea where I can find the proper wiring diagram for this circut board so I can double check things? If the wiring is backwards, will it have screwed anything up trying to get the furnace to run?

RE: Coleman DGAT056BDD No Action

Posted: Fri May 02, 2008 3:42 pm
by Robert
Hi,

You're very welcome. You can get a furnace wiring diagram here if needed:

http://www.mobilehomerepair.com/wireandparts.html


It shouldn't have harmed it, but really depends on situation and how long it has been that way.




Thanks,
Robert