AC pan needed,,,

Questions about repairs and parts for Coleman furnaces, air conditioners and heat pumps for manufactured homes. Click here for Coleman parts.

Moderators: Greg, Mark

Locked
imnothot02

I own a home with a condinser # MBC30MQ i need a new pan due to the old pan having a hole in it due to rust.

Any ideas on where to get this, also what do you think it may cost to reclaim my refrigerant the lines are in front of the pan so the will brobally need to be lowered down somehow...
User avatar
Mark
Site Admin
Posts: 742
Joined: Sat Feb 17, 2007 4:23 pm
Location: Aberdeen, SD
Contact:

The drain pan that you need for underneath an a-coil in a mobile home is 6324-5101 and can be found on this page: http://www.mobilehomerepair.com/ColemanAC.html.

We always like to tell folks to consider the age and condition of your a-coil. The service call to replace a drain pan is about the same as a service call to replace your a-coil. So for a couple hundred more dollars, you could have an all new a-coil vs $400-$500 later. A-coils are also shown at the bottom of this page: http://www.mobilehomerepair.com/ColemanAC.html.

Mark
You can't fail if you don't try!
imnothot02

He mentoned that since tis gas heat that the pan needs to be metal, is this true?
User avatar
Robert
Moderator
Posts: 6413
Joined: Wed Feb 28, 2007 12:07 am
Location: Tennessee

Hi,

If you are in a mobile home, heavy duty plastic pans are all that are used now.


Thanks,
Robert
Some people are Humbly Grateful, while some are Grumbly Hateful.................... Which one are you ?
Locked
  • Similar Topics
    Replies
    Views
    Last post