Page 1 of 1
how to wire up?
Posted: Thu Jun 26, 2008 7:04 am
by vigilant
HI , I WOULD LIKE TO KNOW IF ANY BODY COULD HELP ME TO WIRE UP A A/C UNIT CONDENSER GOODMAN MODEL CK24-10 TO A EXISTING FURNACE MODEL NUMBER FEH-015HA-04 I HAVE INSTALLED THE CONDENSER AND THE EVAPORATOR , THE EXISTING FURNACE HAS ALREADY ELECTRIC HEATING ON IT , PLEASE HELP THANK YOU IN ADVANCE.
RE: how to wire up?
Posted: Thu Jun 26, 2008 2:03 pm
by Robert
Do you have a wiring diagram ?
Do you have an a/c control box ?
Do you know if you have a 2 wire or 4+ wire thermostat system ?
We have wiring diagrams for sell if we know what you have and what is needed.
Too many variables to just give wiring steps from here though.
Who is hooking up the refrigerant lines and charging unit ?
They have to be certified and should be able to wire it up as well.
Take care and best wishes,
Robert
RE: how to wire up?
Posted: Sat Jun 28, 2008 9:20 am
by vigilant
I DO NT HAVE WIRE DIAGRAM , MY THERMOSTAT IS 4 WIRE , I'M GOING TO BUY A A/C CONTROL BOX AND EXCHANGE THE BLOWER ASSEMBLY FOR A/C , THAT ONE IS ON ONLY FOR HEATING , CONDENSER AND EVAPORATOR WAS INSTALLED BY LICENSE PERSON , BUT NO EXPERIENCE ON MOBILE HOME WI RINGS , THANK YOU .
RE: how to wire up?
Posted: Sun Jun 29, 2008 11:53 pm
by Robert
Hi, The a/c control box diagram will show how to hook it up.
The person who installed condenser and a-coil would need to run unit to properly set refrigerant chage, so they should be able to hook up quickly.
Can give a/c control box price quote if needed.
Take care and best wishes,
Robert