Page 1 of 1
Ondura roof panels
Posted: Sun Mar 18, 2007 9:23 am
by curlylocks
Has anyone installed these panels on their roof? and if so did u like the results?
p.s. my roof is flat and then i have a stick built addition to my livingroom that has a midly pitched roof... I am having a problem with leaking where the mobile home meets the addition the former owner just cut a large section out of the mobile home to add the built on room.
RE: Ondura roof panels
Posted: Sun Mar 18, 2007 10:49 am
by Yanita
Hi Curlylocks,
Do you have a link to this?
~Yanita~
RE: Ondura roof panels
Posted: Sun Mar 18, 2007 11:44 am
by JD
Here is a link
http://www.ondura.com/index.htm
Looked all through the site and was not able to see what the stuff is actually made or. With the recycled materials icon, it makes me think some type of plastic or composite.
JD
RE: Ondura roof panels
Posted: Sun Mar 18, 2007 12:12 pm
by Yanita
Hi,
It looks identical to the stuff you can buy at Lowe's. We used some for a porch roof, but not something I would want on my house roof. It got real brittle after 3 years in the hot N.Carolina sun.
If you are looking to redo your roof then get Mark's Manuel and consider the metal roof over that is advertised in there. Complete installation instructions are there as well.
Have a great day!
~Yanita~
RE: Ondura roof panels
Posted: Sun Mar 18, 2007 9:58 pm
by Maureen
Hi Curlylocks,
I have to agree with JD and Yanita here. You want your roof to last a really long time!
We had ours done years ago in a metal metal roof over.
JD has excellent photos of this type of roof on his website. Mark also has an article of it done as a DIY project.
Ours has been on the house for almost 9 years now. Well worth the money!
Maureen
