squirrel cage
Posted: Sun Apr 01, 2007 9:10 am
I have a coleman model dgaa0708dta one year
ago a furnace repair replaced the blower motor
and squirrel cage.when i change the filters,i have
to force the top panel in to get it in.the cage is sticking out
past the frame of furnace.i do not see where you can
move it back for clearance.i had to order a new panel
it broke off at the top of panel.are ther different plates
that the motor is attached to so i can get more clearance
to get panel on without force.there is room at back of furnace.
Thanks for any help,Edward
ago a furnace repair replaced the blower motor
and squirrel cage.when i change the filters,i have
to force the top panel in to get it in.the cage is sticking out
past the frame of furnace.i do not see where you can
move it back for clearance.i had to order a new panel
it broke off at the top of panel.are ther different plates
that the motor is attached to so i can get more clearance
to get panel on without force.there is room at back of furnace.
Thanks for any help,Edward