Page 1 of 1
Backsplash done
Posted: Sun Dec 21, 2008 8:00 pm
by Willc
Posted: Mon Dec 22, 2008 1:10 pm
by Jim from Canada
ooooohhh! I like that! Sally probably will too. We both really like wood. Nice job.
Jim
RE: Backsplash done
Posted: Mon Dec 22, 2008 1:59 pm
by Yanita
Hi Will!
Looking good!
Thanks for the pic. When we get ready to remodel our kitchen I want beadboard walls, was wondering what it would look like.
I am considering staining mine with a gel stain, not sure of color yet though.
Any thoughts on what you are going to use as a sealer? What are your thoughts for behind the stove?
Merry Christmas,
Yanita
RE: Backsplash done
Posted: Mon Dec 22, 2008 8:47 pm
by Willc
No sealer I don't get that messy in the kitchen . It will be a standard black metal splash from lowes. The stain is just a raw umber glaze. The reason I a using a lot of black is the raw umber is a bit brown if you add a lot of black in the trim it will fool the eye.
RE: Backsplash done
Posted: Mon Dec 22, 2008 8:50 pm
by Willc
Also the board is "trim and save "from lowes. 8 dollers for 14 SQ ft . I have less than 40 into it .
RE: Backsplash done
Posted: Tue Dec 23, 2008 8:58 am
by Greg S
You should really seal it with something like a clear urethane or any stains (grease, spaghetti sauce, water etc.) will leave a mark that you can not remove. Several coats of urethane will allow you to wipe it off easily and help to prevent black water stains (mold) from forming along the bottom edge.