Furnace will not cycle
Posted: Thu Jan 15, 2009 1:54 pm
My furnace is acting up, it will cycle once and reach the set temp. on the thermostat and then shuts off. When it tries to cycle again, the ignite will not glow, the gas will start to flow and it will shut the gas off since the furnace cant sense the ignitor glowing. It will try 3 times and then shut off and lock itself out. I can resist it by Turing the power off and it will repeat the same thing over again.
I have replaced the ignitor and cleaned the flame sensor as well and vacuumed the area in and around the burners. If someone has any suggestions as to what else i could try before calling a tech. that would be great, thanks, Chris.
I have replaced the ignitor and cleaned the flame sensor as well and vacuumed the area in and around the burners. If someone has any suggestions as to what else i could try before calling a tech. that would be great, thanks, Chris.