New metal roof as described in "Mobile Holme Repair&quo
Moderators: Greg, Mark, mhrAJ333, JD
-
- Posts: 7
- Joined: Thu Apr 23, 2009 4:41 pm
I have read the instructions in Mobile Home Repair for an inexpensive metal roof. Has anyone actually done this? I ask this because I have a 12 x 48 mobile home with a rounded roof the short dimension and then a slight peak for about 16 feet, 8 feet oneside and the other, in the long dimension, the height of the round is about 4.5 inches in the center or a total bend of about 9 inches. I went to Menards to see if the corrugated metal roof would bend enough to work on my home. The bend in 12 feet of one of their panels did not appear to be hardly any at all. Can anyone provide any information?
Hi and welcome to the forum. I am not sure which steel panels you looked at as we do not have a Menards in my area. But the metal panels like you would find on a steel building or pole barn will be able to make the bend on a curve topped mobile home. The panel will bend much easier and naturally when laid on top of the curve you are putting it on and apply pressure to it. The best way to find out for sure is to contact the manufacturer. They will know the radius the panel is capable of.
JMO
JD
JMO
JD
☯JD♫
Today is PERFECT!
All information and advice given is for entertainment and informational purposes only. The person doing the work is solely responsible to insure that their work complies with their local building code and OSHA safety regulations.
Today is PERFECT!
All information and advice given is for entertainment and informational purposes only. The person doing the work is solely responsible to insure that their work complies with their local building code and OSHA safety regulations.
-
- Posts: 7
- Joined: Thu Apr 23, 2009 4:41 pm
The steel roofing panels I have looked at are in 3 gauges, .28, .29 and .30. and are used for commercial and residential roofs. Menards is in the upper midwest.
-
- Similar Topics
- Replies
- Views
- Last post
-
-
Metal roof over, SW with a peaked metal roof
by Hwystar73 » Thu Dec 17, 2020 9:25 pm » in Mobile Home Repair - 3 Replies
- 93753 Views
-
Last post by Hwystar73
Sun Jan 03, 2021 6:20 pm
-
-
- 10 Replies
- 84718 Views
-
Last post by Heathicus
Wed Oct 04, 2017 4:44 pm
-
- 1 Replies
- 53862 Views
-
Last post by Greg
Wed Sep 27, 2017 7:46 pm
-
-
Where I can I find metal siding for a mobile home?
by Sulteric » Sun Sep 05, 2021 9:36 pm » in Mobile Home Repair - 1 Replies
- 23042 Views
-
Last post by Sulteric
Mon Sep 06, 2021 8:45 am
-
-
- 5 Replies
- 103814 Views
-
Last post by JenniferK
Wed Nov 22, 2017 12:52 am