Page 1 of 1
New metal roof....where to buy??
Posted: Sun May 06, 2007 1:11 pm
by gram2logan
We need to upgrade our roof. Hubby was going to put coating on it this year for now and have rubber roof put on in a year or two. But that is really more money than we want to spend. Any idea how much a metal roof would cost? (materials only) And where do you purchase that sort of metal?
Our home is 22 x 53 double wide with a very shallow peak in the middle (looking at it from the front it's like this /\ - only much much less of an angle)
Thanks!
RE: New metal roof....where to buy??
Posted: Sun May 06, 2007 1:47 pm
by JD
Doing a quick search, I was able to find An Everlast dealer in Goshen.
http://www.countywidemetalsales.com/
Then if your roof is basically flat on each side, as opposed to curved, there is Metal Roofing - DIY in 3 Rivers Michigan, which was offering free shipping through the month of March. I bet they could be coerced into free shipping again. The reason I say flat roof is their product as a tall standing seam. This is a superior roof panel compared to standard corrugated metal. They also have entire roof kits and what appears to be good product support.
http://metalroofingdiy.com/about_us.html
From looking at the web sites, I would imagine that both of the above products are better than the average corrugated metal. The price may also reflect that difference. Standard painted corrugated steel is pretty common and generally locally available. Any dealer/contractor dealing in steel buildings and pole barns would have or be a local supplier.
JD
RE: New metal roof....where to buy??
Posted: Wed May 16, 2007 9:18 pm
by homebuff
I would like to fix my roof the same way. It is a 16x60 single wide. With a v-roof style roof.
RE: New metal roof....where to buy??
Posted: Wed May 16, 2007 9:59 pm
by JD
You can find instructions on how to install a metal roof in the Mobile/Manufactured Home Repair Manual available through the link at the top of this page, Books & Parts
Just look in the phone book or do an internet search for metal roofing in your area. You would have a better idea of the businesses close to you, but I found RSM in Ft Smith and Gates Metals in Gore. Also, being in such a rural area, I would think that Sallisaw Lumber or Red's Building Supply might have the metal. I am sure there are lot's of pole barns in your area.
Hope this helps,
JD