Nordyne Intertherm MGH-065ABWL-07
Posted: Fri Nov 06, 2009 9:31 pm
I fired my system off a few weeks ago and unit has been working fine. In this crazy eastern NC weather we have had to switch back and forth between heat and A/C. I used the heat unit yesterday and it worked fine. I turned up the stat this morning and the unit did not fire off. I turned the stat back and the stat arched. I did it again and same thing. I checked the pilot and it was burning pretty as you please. It has the simple two wire stat so I took the wires off and put them together. Unit would not lite. When I pulled the wires apart I got the same spark. I checked to make sure the heat/ac switch and fan switch were in correct positions. They were. With the thermostat disconnected a funny thing happened when I turned the Heat/ac switch to AC. The AC came on. I checked the gas valve and with the stat wires together and switch on heat, I am not getting voltage to the valve. Is my heat/ac switch or thermostat relay bad?