Page 1 of 1
burners won't ignite
Posted: Mon Dec 07, 2009 9:01 pm
by DottieR
I have a Nordyne Furnace mgha-056abfc-01.
serial # MCH 9203-03841
Must be about 15 yrs old.
I put in a new thermostat and it checks out, but the burners don't ignite.
Pilot is lit and looks strong. AC works.
Help!
Re: burners won't ignite
Posted: Tue Dec 08, 2009 8:16 am
by Robert
Hi,
With a call for heat from t-stat, do you get 24VAC at the gas valve terminals ?
Thanks,
Robert
Re: burners won't ignite
Posted: Tue Dec 08, 2009 11:12 am
by DottieR
Are you replying to my question? I have no idea what you are talking about. You will have to talk in the most simple terms possible. When I try turn on the heat at the thermostat, there is a click at the furnace. that is all I can tell you.
Re: burners won't ignite
Posted: Tue Dec 08, 2009 10:34 pm
by Robert
Hi,
Yes and unfortunately, that is as simple of terms as it gets. If not understood, then trying to do DIY furnace repair is not a wise choice.
I would advise calling an hvac contractor out to diagnose and resolve the issue.
Thanks,
Robert