coleman deluxe belnd air II system flashing light

Questions about repairs and parts for Coleman furnaces, air conditioners and heat pumps for manufactured homes. Click here for Coleman parts.

Moderators: Greg, Mark

Locked
norcal94508
Posts: 1
Joined: Tue Jan 05, 2010 7:47 pm

I used your trouble shooting guide for my deluxe blend air II system. It worked really well. I found that the upper board had burned out. It actually looked a little burned. I replaced both the upper and lower boards. Everything else on the troubleshooting checks out just fine, however, the red flashing light is still on. A power surge is what caused the problem with the upper board. The blower motor on the roof is working, as it blows air and stops and starts. However, I suspect it may have been damaged from the power surge too. Is it possible that a voltage drop or other damage to the blower motor is causing the flashing light? I am stumped!
Top
User avatar
Robert
Moderator
Posts: 6413
Joined: Wed Feb 28, 2007 12:07 am
Location: Tennessee

Sometimes those things have a mind of their own. With a new board, if it is still flashing I would go back over each step to see if anything was missed.


Thanks,
Robert
Some people are Humbly Grateful, while some are Grumbly Hateful.................... Which one are you ?
Top
Locked
  • Similar Topics
    Replies
    Views
    Last post

Return to “Coleman Service & Repair”