Hello.
About 2 months ago I started having issues with my furnace. It is only about 2.5 to 3 years old. I thought it might be the ignitor, but when checking it I found it to be in perfect shape. I saw the board was flashing 4 times, so I replaced the limit switch. It worked for about a day....
Now I get no blinks, which indicates it is working correctly. I can only get the furnace to turn on if i move around the bundle of wires hooking into the main portion of the board. I am not sure what could be bad. I was thinking maybe I need a new wiring kit, or a new board, or both.
Any Ideas or anymore information you might need to make a suggestion?
Just looking on the site I see part 331-02956-000 replaces the board that is my unit. Does that board come with replacement wiring too? I was unable to find it as a seperate part on the site.
Thanks in advance.
Model g8t07512mub12a Sparatic heat
Sounds like a loose wire in the wiring harness. The boards usually do not come with any wiring.
Check each and every individual wire in the bundle to ensure all are tight and make good connections.
Thanks,
Robert
Check each and every individual wire in the bundle to ensure all are tight and make good connections.
Thanks,
Robert
Some people are Humbly Grateful, while some are Grumbly Hateful.................... Which one are you ?
-
- Similar Topics
- Replies
- Views
- Last post
-
-
Evcon Heat Pump - Air Conditioner Model No. BRHS036B Making HUM Before Starting
by Dave_L » Tue Aug 29, 2023 1:26 am » in Coleman Service & Repair - 0 Replies
- 126592 Views
-
Last post by Dave_L
Tue Aug 29, 2023 1:26 am
-
-
-
Intertherm outdoor a/c unit, blower not turning off. Model unknown rating plate is faded out.
by tkrueger » Sat May 05, 2018 8:57 pm » in Nordyne Service & Repair - 0 Replies
- 116500 Views
-
Last post by tkrueger
Sat May 05, 2018 8:57 pm
-
-
-
Nordyne model m1mb 070a bw power issue
by Combustibleink » Mon Nov 16, 2020 10:21 am » in Nordyne Service & Repair - 0 Replies
- 116179 Views
-
Last post by Combustibleink
Mon Nov 16, 2020 10:21 am
-
-
-
Model DGAA070BDTA venting kit needed.
by spazatac » Fri May 24, 2024 11:21 am » in Coleman Service & Repair - 2 Replies
- 762 Views
-
Last post by spazatac
Mon Jun 10, 2024 3:11 pm
-
-
- 0 Replies
- 23734 Views
-
Last post by nestsman
Sat Aug 19, 2017 1:47 pm