Coleman DGAA070BDTA Flame goes out as soon as blower starts

Questions about repairs and parts for Coleman furnaces, air conditioners and heat pumps for manufactured homes. Click here for Coleman parts.

Moderators: Greg, Mark

Locked
johnrich
Posts: 2
Joined: Sat Feb 06, 2010 11:55 am

I have a Coleman DGAA070BDTA Propane furnace. It has worked all winter until this morning. When turning it on, after around ten seconds I can see it start to glow through the view hole. After around 5-10 more seconds the flames appear. After around 15 seconds more the blower kicks on and the flames go out. Any suggestions would be greatly appreciated. Thanks!
Top
johnrich
Posts: 2
Joined: Sat Feb 06, 2010 11:55 am

Actually, I found out what the problem was. We had tremendous snow fall last night and and piled up around the flue vent and it wasn't getting enough oxygen. Once I cleared the snow off the roof around the flue, it started working fine again.
Top
User avatar
Robert
Moderator
Posts: 6413
Joined: Wed Feb 28, 2007 12:07 am
Location: Tennessee

Glad you got it taken care of.


Thanks,
Robert
Some people are Humbly Grateful, while some are Grumbly Hateful.................... Which one are you ?
Top
Locked
  • Similar Topics
    Replies
    Views
    Last post

Return to “Coleman Service & Repair”