I have a Coleman EB20B furnace that I need an AC control module for. Can anyone point me in the right direction to find one?
Thank you.
Scott
Need AC Control Mod for EB20B
Hi Scott,
Control Module has many branches and those two words used many ways. What is the purpose yours is for and where is it located, so I can ensure we are on the same page please.
Thanks,
Robert
Control Module has many branches and those two words used many ways. What is the purpose yours is for and where is it located, so I can ensure we are on the same page please.
Thanks,
Robert
Some people are Humbly Grateful, while some are Grumbly Hateful.................... Which one are you ?
-
- Posts: 2
- Joined: Sat Aug 07, 2010 1:22 pm
Robert -- I have the furnace but no Central AC control. I was told that I need a separate module in order to operate my central ac with this unit. The furnace itself states that the blend control is needed to operate the ac so I figured that is what I needed to look for.
Thanks.
Scott in Illinois
Thanks.
Scott in Illinois
Hi Scott,
Do you currently have the outside condenser and indoor a-coil for having a/c ?
If so, the t-stat and a fan relay in the control box is all that is needed and both of those you have already.
IF you have a Blend Air system, you'll need a blend air control box IF it is a Deluxe Blend Air II.
Your wiring then is spliced into the blend air circuits.
Thanks,
Robert
Do you currently have the outside condenser and indoor a-coil for having a/c ?
If so, the t-stat and a fan relay in the control box is all that is needed and both of those you have already.
IF you have a Blend Air system, you'll need a blend air control box IF it is a Deluxe Blend Air II.
Your wiring then is spliced into the blend air circuits.
Thanks,
Robert
Some people are Humbly Grateful, while some are Grumbly Hateful.................... Which one are you ?
-
- Similar Topics
- Replies
- Views
- Last post
-
-
Nordyne Mod. E1EH-015HA split unit/eliminate cooling?
by carolina jim » Thu Oct 24, 2019 8:33 am » in Nordyne Service & Repair - 0 Replies
- 39441 Views
-
Last post by carolina jim
Thu Oct 24, 2019 8:33 am
-
-
-
have intertherm heat pump with a 913421 control box tying to a miller 841 thermo stat ,
by hillcat01 » Mon Oct 21, 2019 7:28 pm » in Nordyne Service & Repair - 0 Replies
- 86942 Views
-
Last post by hillcat01
Mon Oct 21, 2019 7:28 pm
-
-
-
Need advice on blower
by NorthTexasSafariGuy » Mon Jul 31, 2017 9:18 am » in Coleman Service & Repair - 0 Replies
- 70627 Views
-
Last post by NorthTexasSafariGuy
Mon Jul 31, 2017 9:18 am
-
-
-
Need to remove a stripped Allen wrench-type plug from the OUT PRESS port on top of gas valve
by justplumducky » Fri Aug 25, 2017 8:21 am » in Nordyne Service & Repair - 1 Replies
- 49086 Views
-
Last post by Maxwell.lipphardt
Mon Feb 04, 2019 6:29 am
-
-
-
Need help identifying manufacturer of back door
by nestsman » Mon Oct 09, 2017 11:25 am » in Mobile Home Repair - 2 Replies
- 22952 Views
-
Last post by UmpJJ
Wed Oct 18, 2017 8:48 am
-