Coleman DGAA070BDTA booster blower removal

Questions about repairs and parts for Coleman furnaces, air conditioners and heat pumps for manufactured homes. Click here for Coleman parts.

Moderators: Greg, Mark

Locked
A13084U2
Posts: 4
Joined: Fri Nov 05, 2010 2:44 pm

Hey everyone,

I need to replace the booster blower on my furnace, DGAA070BDTA. Is it possible to remove the small plastic cover on the side of the fresh air combustion pipe and remove just the motor from that small square opening ?

THX

Robert
Top
User avatar
Robert
Moderator
Posts: 6413
Joined: Wed Feb 28, 2007 12:07 am
Location: Tennessee

The motor is not sold separately, it is all one assembly.


Booster Assembly # 373-19801-820 can be seen and ordered here by paging down:


http://www.aberdeenhomerepair.com/store ... oster-assy


Thanks,
Robert
Some people are Humbly Grateful, while some are Grumbly Hateful.................... Which one are you ?
Top
A13084U2
Posts: 4
Joined: Fri Nov 05, 2010 2:44 pm

Thx for the reply. I have a new assembly. My question was can you just swap motors and not drop the combustion cover down and pull out the whole assembly ?
Top
User avatar
Robert
Moderator
Posts: 6413
Joined: Wed Feb 28, 2007 12:07 am
Location: Tennessee

Hi,

I answered that.The motor is not sold separately, it is all one assembly together.


Thanks,
Robert
Some people are Humbly Grateful, while some are Grumbly Hateful.................... Which one are you ?
Top
Locked
  • Similar Topics
    Replies
    Views
    Last post

Return to “Coleman Service & Repair”