When reviewing earlier posts it was suggested to search "JD" because he is the roof guru, The site will not let me input "JD" - not enough characters.
When I search metal roofs it shows many off topic posts.
Can you help?
Searching for Roof info
Moderators: Greg, Mark, mhrAJ333, JD
Using this search link, " JD " will bring up my posts. I imagine " jd roof " would bring roof posts.
http://www.mobilehomerepair.com/searchsite.html
I don't know about the guru part. I have just been doing this work for a long long time. I actually spend as much time repairing floors and decks as I do roofs. Was there a particular question?
http://www.mobilehomerepair.com/searchsite.html
I don't know about the guru part. I have just been doing this work for a long long time. I actually spend as much time repairing floors and decks as I do roofs. Was there a particular question?
☯JD♫
Today is PERFECT!
All information and advice given is for entertainment and informational purposes only. The person doing the work is solely responsible to insure that their work complies with their local building code and OSHA safety regulations.
Today is PERFECT!
All information and advice given is for entertainment and informational purposes only. The person doing the work is solely responsible to insure that their work complies with their local building code and OSHA safety regulations.
Thanks for the reply.
Sorry for starting such astir about your skills.
the link did work but it may be quicker to simply ask my question weven if it has been answered before.
I have a 79 victorian that has a "Domed Roof" and has a slight transition in the roof near the center.
can the metal roof described in the repair manual be installed on this type of roof?
do I need a roof Cap or will the metal conform to the domed roof.
How is the transition from higher elevation to lower elevation completed?
I there someone that has done this before?
If so can photos be posted?
Thank you for your help.
Roger
Sorry for starting such astir about your skills.
the link did work but it may be quicker to simply ask my question weven if it has been answered before.
I have a 79 victorian that has a "Domed Roof" and has a slight transition in the roof near the center.
can the metal roof described in the repair manual be installed on this type of roof?
do I need a roof Cap or will the metal conform to the domed roof.
How is the transition from higher elevation to lower elevation completed?
I there someone that has done this before?
If so can photos be posted?
Thank you for your help.
Roger
Roger, I have not put this type of roof down, but we have gotten feed back that it will conform to the domed shape pitch.
Mark, the site owner has a section in his book that deals with it, and there are some posts in this section of the forum as well.
As for JD, He is GOOD, if you look at pictures of some of his jobs you can easily see just how skilled he is. Greg
Mark, the site owner has a section in his book that deals with it, and there are some posts in this section of the forum as well.
As for JD, He is GOOD, if you look at pictures of some of his jobs you can easily see just how skilled he is. Greg
"If I can't fix it, I can screw it up so bad no one else can either."
I also have not installed one of these roofs. I have a different roof product. But the metal panels will comform to the dome shape, but it can't do a dome and a bend lengthways with the panel. The panel will really resist bottoming out against the roof in the uphill bend. You may have to add support there. Where the previous panel will be domed, the one at the bend will tend to straighten out.
☯JD♫
Today is PERFECT!
All information and advice given is for entertainment and informational purposes only. The person doing the work is solely responsible to insure that their work complies with their local building code and OSHA safety regulations.
Today is PERFECT!
All information and advice given is for entertainment and informational purposes only. The person doing the work is solely responsible to insure that their work complies with their local building code and OSHA safety regulations.
-
- Similar Topics
- Replies
- Views
- Last post
-
-
Questions about steel roof options for arched roof
by Reezer76 » Thu Sep 14, 2017 9:41 pm » in Mobile Home Repair - 2 Replies
- 65024 Views
-
Last post by JD
Sun Sep 17, 2017 4:31 pm
-
-
- 5 Replies
- 103794 Views
-
Last post by JenniferK
Wed Nov 22, 2017 12:52 am
-
- 2 Replies
- 65650 Views
-
Last post by JenniferK
Fri Nov 24, 2017 2:02 am
-
-
Roof replacement and roof over project - combined
by Joemontana » Mon May 04, 2020 9:02 pm » in Mobile Home Repair - 1 Replies
- 66709 Views
-
Last post by Greg
Tue May 05, 2020 5:06 pm
-
-
-
Metal roof over, SW with a peaked metal roof
by Hwystar73 » Thu Dec 17, 2020 9:25 pm » in Mobile Home Repair - 3 Replies
- 93710 Views
-
Last post by Hwystar73
Sun Jan 03, 2021 6:20 pm
-