![Smile :)](./images/smilies/icon_smile.gif)
I have a brain storm project i'm thinking of doing soon as possible for a very good reason.
I'm good at doing carpentry projects.
The home is a 88 model Heritage 16x60 v-roof with metal siding & decorative inside wall panels.
Will bve happy to add any extra details if needed about the house.
Have one large window already in the bedroom 3/4 way down about 12" from the bottom of the wall but want to cut out another hole in the north wall & install a new window.
Now! I haven't done a project this large before but I think if I can build on an additional 16x12 front covered deck on my front porch I can most likely do this project.
Don''t want to make any mistakes cutting out the hole & get the measurements all out of wack & get my wife mad at me.
Your staff has lot's of projects on here but none on adding a new window.
So! Could someone kinda direct me in the right direction on how to do this project so I don't make a boo! boo! somewhere the down the line.
I know there might be problems accidently cutting into wiring & such but have the know how to prevent this.
The window will be positioned at least 1/2 way up the wall (head viewing distance) & not real low like the other windows in the house.
Size is important too.
Thank's for any instruction!
David
![Smile :)](./images/smilies/icon_smile.gif)