AC Condensing Fan Not Working
Posted: Mon Mar 14, 2011 2:52 pm
I have a split pack system in my manufactured house. The outside unit is Coleman I believe. The condensing coil was cleaned but not the A-coil. It is sealed by sheet metal and metal tape. Not sure I want to take that apart but would like advice. In reviewing others with this issue it was recommended that they test the capacitor and contactor. What I need to know is how to do that and what kind of meter should I use. I only have a cheap $10.00 one. Gas blower unit was serviced a few months ago and everything was fine. Need to know asap because it will be 90 degrees tomorrow. Thanks for you help. Here are some system component information gleaned from equipment labels.
Manufactured Home HVAC Info from inside the house and product label information from outside
Intertherm gas furnace with following Nordyne part nos. 703911A, Model MIMB077A BW,
SN MIM990407734
Outside Condensing is a Coleman/Evcon Unit I believe (plastic label is gone)
GE Capacitor Model 97F9838 5UF 40 UF 440 VAC +06 -06% 50/60 HZ S10000AFC 9325GB01
Dielektrol VI SN 024-25894-000
Contactor PN 024-27531-000 3100-15Q2115 Coil 24VAC 22 InLbs torgue for CU 75 #C
Bristol Co. Compressor Model #H23A423ABCA OC-06 Part #703995 -1101-00
(S) 27499-44260 (P) 015-02784-004, V=230/265, HZ=60, PH=1 LRA=110
Fan Motor Info (A4) AO Smith Electric Products Co Model F48G45A48 SER=G199 HP=1/5 V=208-230
RPM 825 ROT=CWLE Amps=1.3 HZ=60 SF=1.0 FR=484 PH=1
Inside Cover over elctrical components it has the following information:
Model #BRCS0481BD, Serial #991038223
Factory Charge 7 lbs. 5 oz R22
Design Pressure High Side = 350 PSIG Low Side = 300 PSIG
Unit Supply 208-230V 1PH 60 Hz /Compressor 208-230V 1PH 60Hz 23RLA 110LRA
Fan Motor 208-230V 1PH 60 Hz 1.3FLA 1/5 HP
Manufactured Home HVAC Info from inside the house and product label information from outside
Intertherm gas furnace with following Nordyne part nos. 703911A, Model MIMB077A BW,
SN MIM990407734
Outside Condensing is a Coleman/Evcon Unit I believe (plastic label is gone)
GE Capacitor Model 97F9838 5UF 40 UF 440 VAC +06 -06% 50/60 HZ S10000AFC 9325GB01
Dielektrol VI SN 024-25894-000
Contactor PN 024-27531-000 3100-15Q2115 Coil 24VAC 22 InLbs torgue for CU 75 #C
Bristol Co. Compressor Model #H23A423ABCA OC-06 Part #703995 -1101-00
(S) 27499-44260 (P) 015-02784-004, V=230/265, HZ=60, PH=1 LRA=110
Fan Motor Info (A4) AO Smith Electric Products Co Model F48G45A48 SER=G199 HP=1/5 V=208-230
RPM 825 ROT=CWLE Amps=1.3 HZ=60 SF=1.0 FR=484 PH=1
Inside Cover over elctrical components it has the following information:
Model #BRCS0481BD, Serial #991038223
Factory Charge 7 lbs. 5 oz R22
Design Pressure High Side = 350 PSIG Low Side = 300 PSIG
Unit Supply 208-230V 1PH 60 Hz /Compressor 208-230V 1PH 60Hz 23RLA 110LRA
Fan Motor 208-230V 1PH 60 Hz 1.3FLA 1/5 HP